Bosch HGI8056UC Supplemental

Bosch HGI8056UC Manual

Get Bosch HGI8056UC PDF manuals and user guides View all Bosch HGI8056UC manuals
Add to My Manuals
Save this manual to your list of manuals

Bosch HGI8056UC manual content summary:

  • Bosch HGI8056UC | Supplemental - Page 1
    power supply is not turned off. Turn off main power supply at the service panel before changing the light bulbs. 3. Slide the tip of a flat Bulb image 25 Watt, 25WPRE14, incandescent bulb, European base, 120 volts 4. Support the glass lens cover with fingers along the bottom edge to prevent the
  • Bosch HGI8056UC | Supplemental - Page 2
    est sous tension lorsque la porte est ouverte si l'alimentation principale n'est pas coupée. Coupez l'alimentation électrique principale sur le panneau de service avant de changer les ampoules. 4. Remove the old bulb by grasping and sliding the bulb straight back until the two prongs have cleared
  • Bosch HGI8056UC | Supplemental - Page 3
    'elle s'allume pour la première fois. Saisissez l'ampoule de remplacement avec un chiffon propre et sec. Repérez les deux tiges dans le support de céramique, en tâtant légèrement jusqu'à ce que les deux tiges s'insèrent dans la douille céramique . 4. Retirez l'ampoule en saisissant et en faisant
  • Bosch HGI8056UC | Supplemental - Page 4
    Remplacement d'une ampoule de four de base Edison ou européenne 1. Couper l'alimentation du four au tableau de distribution principal (boite à fusibles ou boîtier de disjoncteurs). 2. Retirez les grilles du four. 3. Tournez le couvert en verre dans le sens antihoraire pour le retirer. Sustitución
  • Bosch HGI8056UC | Supplemental - Page 5
    Sustitucion de un foco del horno con base G9 1. Desconectar la corriente que va al horno en el suministro de alimentación principal (fusible o caja de breakers). 2. Retirar las rejillas del horno. 3. Deslizar el extremo de un desarmador de punta plana entre el clip de soporte y la carcasa del foco.
  • Bosch HGI8056UC | Supplemental - Page 6
    de las agujas del reloj. 6. Volver a atornillar el cristal protector. 7. Encender el breaker. 1901 MAIN STREET, SUITE 600, IRVINE, CA 92614 // 800-735-4328 // WWW.BOSCH-HOME.COM © 2020 BSH Home Appliances Corporation 6 8001199312
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
1
Replacing an oven light bulb
9
WARNING
Risk of electric shock!
Light socket is live when door is open if main power
supply is not turned off.
Turn off main power supply at the service panel
before changing the light bulbs.
9
WARNING
Risk of injury!
Make sure the appliance and lights are cool and
power to the appliance has been turned off before
replacing the light bulb(s). Failure to do so could
result in electrical shock or burns.
The lenses must be in place when using the
appliance.
The lenses serve to protect the light bulb from
breaking.
The lenses are made of glass. Handle carefully to
avoid breaking. Broken glass can cause an injury.
Light bulb specifications
Refer to this chart for information on the light bulb you
must to use for your oven model.
Replacing a G9 base oven light
1.
Turn off the power to the oven at the main power
supply (fuse or breaker box).
2.
Remove the oven racks.
3.
Slide the tip of a flat blade screw driver between the
holder clip and the lamp housing.
4.
Support the glass lens cover with fingers along the
bottom edge to prevent the cover from falling to the
bottom of the oven. Gently twist the flat blade screw
driver to loosen the glass lens cover
.
5.
Remove the glass lens cover.
6.
Remove the bulb by grasping and sliding the bulb
straight back until the two prongs have cleared the
ceramic holder
.
7.
DO NOT
touch the glass of the new replacement bulb
with your fingers. It may cause the bulb to fail when it
first lights. Grasp the replacement bulb with a clean
dry cloth. Locate the two prongs in the ceramic holder,
gently poking until the two prongs locate in the
ceramic socket
.
8.
Press in to seat the bulb.
9.
Slide the protective lens into the holder clip and push
the other end until the fixing clip snaps back into the
housing
.
10.
Turn on the circuit breaker.
Bulb description
Bulb image
25 Watt, 25WPRE14,
incandescent bulb,
European base, 120 volts
40 Watt, incandescent
bulb, Edison base, 120
volts
25 Watt, halogen bulb, G9
base, 120 volts