Bosch SGE53B56UC Use and Care Manual - Page 43
Change your Detergent.
View all Bosch SGE53B56UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Troubleshooting en-us Issue Cause and troubleshooting Wipeable or watersoluble coatings inside the appliance or on the door. There is detergent residue. These coatings cannot generally be removed with chemicals. ▶ Change your Detergent. ▶ Scrub the appliance by hand. White coating is deposited inside the appliance. 1. Adjust the water softening system correctly. In most cases you will need to increase the setting. 2. If necessary, change your detergent. Special salt dispenser is not screwed tight. ▶ Screw the special salt dispenser tight. There are stubborn white coatings on the dishware, inside the appliance or on the door. There is detergent residue. These coatings cannot generally be removed with chemicals. ▶ Change your Detergent. ▶ Scrub the appliance by hand. The hardness range is set incorrectly, or the water hardness is greater than 62 °E (8.9 mmol/l). ▶ Set the Water softening system to the water hardness or add special salt. 3in1/organic/eco detergent is not effective enough. ▶ Set the Water softening system to the water hardness and use separate detergents (name brand, special salt, rinse aid). Too little detergent is being used. ▶ Increase the amount of detergent used or change Detergent . Selected wash cycle is too light. ▶ Select a more intensive cycle. Tea residue or lip- Dishwashing temperature is too low. stick marks on dish- ▶ Select a program with a higher dishwashing ware. temperature. Too little detergent is being used or is unsuitable. ▶ Use a suitable Detergent and follow the manufacturer's instructions for the amount to be used. Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. ▶ Only remove large remnants of food and do not pre-rinse dishware. 43