Bosch SGX78C55UC Installation Instructions - Page 11
Installation of Mounting Brackets, Installation of Rubber Drain Hose Adaptor
View all Bosch SGX78C55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation of Rubber Drain Hose Adaptor For a large port, use the drain hose as it is. 1. For a small port, insert the rubber drain hose adaptor into the drain hose end. 2. Obtain the Rubber Drain Hose Adaptor (J) spring clamp from the Dishwasher Installation Kit (do not substitute). 3. Insert the dishwasher drain hose into the end of the drain hose (see Figure 13. Be sure to fully insert the drain hose. 4. Use the clamp provided to attach the Rubber Drain Hose Adaptor to the house plumbing as shown in Figure 14. J Figure 13 Top Mount is used for countertops made of wood or other materials that can be easily drilled. Orient the mounting brackets as shown in Figure 15 and position the two small tabs on the mounting brackets over the two slots on the dishwasher's front corners. Push the mounting brackets down firmly to insert the tabs into the slots. The difference in Top Mount and Side Mount is the screw will be placed and secured in different holes of the mounting bracket (refer to "Securing the Dishwasher" section on the next page). Side Mount is used for countertops made of marble, granite, or other very hard materials that cannot be easily drilled. Bend the mounting brackets along the small holes and in the same direction as the two small tabs. Orient the mounting brackets as shown in Figure 15, and position the two small tabs on the mounting brackets over the two slots on the dishwasher's front corners. Push the mounting brackets down firmly to insert the tabs into the slots. Bend perforated edge down as shown. Figure 15 Top and Side Mount C G Figure 14 Installation of Mounting Brackets Alternate Side Mount for opening 235/8″ (600 mm). Insert a side mount force distributor (M) in each side as shown in Figure 16. Before installing the supplied countertop mounting brackets, decide which method of securing the M dishwasher into its enclosure will be used. Once the mounting brackets are installed on the dishwasher, removing them is difficult and will damage the M mounting brackets and the dishwasher. The dishwasher can be secured into its enclosure in 3 ways: NOTE: If your dishwasher opening width measures >235/8″ (600 mm) use the TOP or SIDE MOUNT mounting methods. If your dishwasher opening width measures 235/8″ (600 mm) use the ALTERNATE SIDE MOUNT mounting method. Figure 16 Alternate Side Mount 1111