Bosch SHE3AEE5N Use and Care Manuals - Page 27

Troubleshooting en-us Issue Cause and troubleshooting Wipeable or water-soluble coatings There is detergent residue. These coatings cannot generally be removed with inside the appliance or on the chemicals. door. ▶ Change your Detergent. ▶ Scrub the appliance by hand. There are stubborn white coatings on the dishware, inside the appliance or on the door. There is detergent residue. These coatings cannot generally be removed with chemicals. ▶ Change your Detergent. ▶ Scrub the appliance by hand. Too little detergent is being used. ▶ Increase the amount of detergent used or change Detergent . Selected wash cycle is too light. ▶ Select a more intensive wash program. Tea residue or lipstick marks on dishware. Dishwashing temperature is too low. ▶ Select a program with a higher dishwashing temperature. Too little detergent is being used or is unsuitable. ▶ Use a suitable Detergent and follow the manufacturer's instructions for the amount to be used. Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. ▶ Only remove large remnants of food and do not pre-rinse dishware. There are colored coatings (blue, The formation of films is due to substances contained in vegetables (cabbage, yellow, brown) inside the appliance celery, potatoes, noodles, etc.) or tap water (manganese). or on stainless steel dishware that ▶ Clean the appliance. are difficult or impossible to remove. You can remove coatings with Mechanical cleaning → Page 22 or a machine cleaning product. It may not always be possible to completely remove coatings but they are harmless to health. The formation of films is due to metal components on silver or aluminum dishware. ▶ Clean the appliance. You can remove coatings with Mechanical cleaning → Page 22 or a machine cleaning product. It may not always be possible to completely remove coatings but they are harmless to health. Plastic parts inside the appliance are discolored. Plastic parts inside the appliance may become discolored over the life of the dishwasher. ▶ Discoloration may come about and will not impair functioning of the appliance. Plastic parts are discolored. Dishwashing temperature is too low. ▶ Select a program with a higher dishwashing temperature. Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. ▶ Only remove large remnants of food and do not pre-rinse dishware. There are removable streaks on Amount of rinse aid to be dispensed is set too high. glasses, glassware with a metallic ▶ Set the rinse aid system to a lower setting. appearance and silverware. → "Setting the amount of rinse aid", Page 13 No rinse aid has been added. ▶ Add rinse aid. → "Adding rinse aid", Page 12 There is detergent residue in the final rinse. Lid of detergent dispenser is blocked by dishware and will not open fully. 1. Arrange dishware in the upper rack so the tab collecting tray is not obstructed by dishware. → "Loading dishware", Page 15 27