Bosch SHE3AEM6N Use and Care Manuals - Page 27

Cleaning filters, Filter system, Upper rack, Loading dishware

Get Bosch SHE3AEM6N PDF manuals and user guides View all Bosch SHE3AEM6N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Troubleshooting en-us Issue Food remnants on dishware. Cause and troubleshooting Dishware was placed too close together or rack is overfilled. 1. Arrange dishware with sufficient space in between. The spray jets must reach the surfaces of the dishware. 2. Avoid points of contact. Spray arm rotation of the lower spray arm is blocked. ▶ Arrange dishware so it does not obstruct spray arm rotation. Spray arm nozzles are blocked. ▶ Clean the Spray arms → Page 23. Filters are dirty. ▶ Clean the filters. → "Cleaning filters", Page 22 Filters are inserted incorrectly and/or not engaged. 1. Insert the filters properly. → "Filter system", Page 22 2. Twist filters into place. Selected wash cycle is too light. ▶ Select a more intensive wash program. Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. ▶ Only remove large remnants of food and do not pre-rinse dishware. Tall narrow containers in corner areas are not rinsed out adequately. ▶ Do not position tall narrow containers at too great an angle or in corner areas. Upper rack on right and left not set to same height. ▶ Set the upper rack on the left and right to the same height. → "Upper rack", Page 11 Detergent residue in the appliance Lid of the detergent dispenser is blocked by items of dishware and will not open. 1. Arrange dishware in the upper rack so the tab collecting tray is not obstructed by dishware. → "Loading dishware", Page 15 Items of dishware are blocking the dispenser lid. 2. Do not place dishware or fragrance dispensers in the tab collecting tray. The lid of the detergent dispenser is blocked by the tab and will not open. ▶ Position the tab in the detergent dispenser crosswise, not vertically. Tabs are used in the quick or short cycle. There is not enough time for the tab to dissolve. ▶ Select a more intensive Wash cycle or use Powder detergent. Detergent may lose its cleaning or dissolving ability after being stored a long time, or the detergent is clumped together. ▶ Change your Detergent. Water spots on plastic parts. Droplet formation on plastic surfaces is unavoidable due to the laws of physics. Water spots are visible after drying. ▶ Select a more intensive program. ▶ Position dishware at an angle. → "Loading dishware", Page 15 ▶ Use rinse aid. → "Rinse aid", Page 12 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
Troubleshooting
en-us
27
Issue
Cause and troubleshooting
Food remnants on dishware.
Dishware was placed too close together or rack is overfilled.
1.
Arrange dishware with sufficient space in between.
The spray jets must reach the surfaces of the dishware.
2.
Avoid points of contact.
Spray arm rotation of the lower spray arm is blocked.
▶
Arrange dishware so it does not obstruct spray arm rotation.
Spray arm nozzles are blocked.
▶
Clean the Spray arms
→
Page 23
.
Filters are dirty.
▶
Clean the filters.
→
"Cleaning filters", Page 22
Filters are inserted incorrectly and/or not engaged.
1.
Insert the filters properly.
→
"Filter system", Page 22
2.
Twist filters into place.
Selected wash cycle is too light.
▶
Select a more intensive wash program.
Dishware has been precleaned too intensively. Then the sensors choose a lighter
cycle. Stubborn remnants cannot be entirely removed.
▶
Only remove large remnants of food and do not pre-rinse dishware.
Tall narrow containers in corner areas are not rinsed out adequately.
▶
Do not position tall narrow containers at too great an angle or in corner areas.
Upper rack on right and left not set to same height.
▶
Set the upper rack on the left and right to the same height.
→
"Upper rack", Page 11
Detergent residue in the appliance
Lid of the detergent dispenser is blocked by items of dishware and will not open.
1.
Arrange dishware in the upper rack so the tab collecting tray is not obstructed by
dishware.
→
"Loading dishware", Page 15
Items of dishware are blocking the dispenser lid.
2.
Do not place dishware or fragrance dispensers in the tab collecting tray.
The lid of the detergent dispenser is blocked by the tab and will not open.
▶
Position the tab in the detergent dispenser crosswise, not vertically.
Tabs are used in the quick or short cycle. There is not enough time for the tab to
dissolve.
▶
Select a more intensive Wash cycle or use Powder detergent.
Detergent may lose its cleaning or dissolving ability after being stored a long time,
or the detergent is clumped together.
▶
Change your Detergent.
Water spots on plastic parts.
Droplet formation on plastic surfaces is unavoidable due to the laws of physics.
Water spots are visible after drying.
▶
Select a more intensive program.
▶
Position dishware at an angle.
→
"Loading dishware", Page 15
▶
Use rinse aid.
→
"Rinse aid", Page 12