Bosch SHE66C02UC Installation Instructions - Page 12

Placing The Dishwasher, Securing The Dishwasher - 22

Get Bosch SHE66C02UC - Evolution 800 Series Dishwasher PDF manuals and user guides
UPC - 825225837657
View all Bosch SHE66C02UC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Placing the Dishwasher/ Securing the Dishwasher PLACING THE DISHWASHER 14" (355mm) 21" (533mm) Figure 19 1 Straighten and position the hot water supply line and the electrical supply cable as shown in Figure 19 so that they will align with their channels under the dishwasher base. 2 Position the dishwasher close enough to the enclosure so that you can run the dishwasher drain hose to the under sink drain connection. Make certain that the hot water supply line and the electrical supply cable are in their channels under the dishwasher base, as shown in Figure 20. 3 Slide the dishwsher into the opening making sure that the hot water supply line and the electrical supply cable stay in their proper channels. 4 Make sure the dishwasher is level. Adjust the rear leveler by turning the center screw at the front of the dishwasher, as shown in Figure 21a. Turning the screw clockwise raises the rear of the dishwasher. Adjust the front levelers by turning them with a screwdriver, as shown in Figure 21b. Turning the levelers to the right raises the dishwasher. If additional height is needed, shims may be added under the leveler feet. Hot Water Supply Line and Electrical Supply Cable Position in Channels Figure 20 SECURING THE DISHWASHER 1 Drive the mounting screws through the holes in the mounting brackets as shown in Figure 22 for Top or Side Mount. a b Figure 21 Top Mount Side Mount Figure 22 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
10
PLACING THE DISHWASHER
1
Straighten and position the hot water supply line and
the electrical supply cable as shown in
Figure 19
so
that they will align with their channels under the
dishwasher base.
2
Position the dishwasher close enough to the enclosure
so that you can run the dishwasher drain hose to the
under sink drain connection. Make certain that the hot
water supply line and the electrical supply cable are in
their channels under the dishwasher base, as shown in
Figure 20
.
3
Slide the dishwsher into the opening making sure that
the hot water supply line and the electrical supply
cable stay in their proper channels.
4
Make sure the dishwasher is level. Adjust the rear
leveler by turning the center screw at the front of the
dishwasher, as shown in
Figure 21a
. Turning the screw
clockwise raises the rear of the dishwasher. Adjust the
front levelers by turning them with a screwdriver, as
shown in
Figure 21b
. Turning the levelers to the right
raises the dishwasher. If additional height is needed,
shims may be added under the leveler feet.
SECURING THE DISHWASHER
1
Drive the mounting screws through the holes in the
mounting brackets as shown in
Figure 22
for Top or
Side Mount.
Figure 21
a
b
Figure 19
21"
(533mm)
14"
(355mm)
Figure 20
Placing the Dishwasher/ Securing the Dishwasher
Hot Water Supply Line
and Electrical Supply
Cable Position in
Channels
Figure 22
Top Mount
Side Mount