Bosch SHP7PT55UC Instructions for Use - Page 48
Auto Power Off, Langue, Time Light
View all Bosch SHP7PT55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Auto Power Off Pour économiser l'énergie, le lave-vaisselle est éteint 1 minute après le cycle de lavage se termine. Mise hors tension automatique peut être réglée de P: 00 à P: 02. Pour modifier le réglage d'usine (P: 01): 1 Appuyez sur la touche [On/Off]. Maintenez enfoncée la touche "A" et appuyez sur [Start] jusqu'à ce que l'affichage indique "d: 00". 2 Relâchez les deux boutons. Appuyez sur le bouton "A" jusqu'à ce que l'afficheur indique "P: 01". 3 Appuyez sur la touche "C" jusqu'à ce que l'écran correspond à vos besoins. P:00 = lave-vaisselle ne s'éteint pas automatiquement P:01 = lave-vaisselle s'éteint automatiquement après 1 minute P:02 = lave-vaisselle s'éteint automatiquement après 120 minutes (2 heures) 4 Appuyez sur [Start] pour sauvegarder le réglage. Langue 1 Ouvrir la porte et allumer le lave-vaisselle en appuyant sur [ON/OFF]. 2 Maintenir la touche A enfoncée et appuyer et maintenir la touche [START] enfoncée jusqu'à ce que l'affichage indique « d:00 ». 3 Relâcher les deux touches. Appuyer sur A jusqu'à ce que l'affichage indique « L:01 ». 4 Appuyer sur C pour sélectionner le paramètre souhaité. « L:02 » = English « L:03 » = Français « L:07 » = Spanish 5 Appuyer sur [START] pour sauvegarder le paramètre et fermer la porte. Time Light Our Star-Sapphire® dishwashers offer a convenient time remaining indicator light that projects cycle status and time remaining on the kitchen floor. Note: If the appliance is installed at eye-level, the time remaining information is not visible. In the default setting (S:01) the time remaining shows on the floor alternating with the Bosch logo (about 5 seconds per image). Time remaining image Bosch logo To change setting: 1 Press the [On/Off] button. 2 Hold down the "A" button and press [Start] until the display indi- cates "d:00". 3 Release both buttons. Press the "A" button until the display shows "S:01". 4 Press the "C" button until to switch between "S:00" = OFF, "S:01" and "S:02" = Time Light ON 519 Press [Start] to save the setting.