Bosch SHV9PT53UC Instructions for Use - Page 14

Wash Cycle Information The cycle times in this Use and Care Manual are based on normal soil loads and 120°F incoming water and will vary based on your actual conditions. Table 3 - Wash Cycle Information Heavy Auto Glass Normal Express Rinse cycle time 110-135 min 105-129 min 80-85 min 130-135 min 30 min 9 min water consumption 18.6-24.2 L 4.9-6.4 gal 13.1-24.5 L 3.5-6.5 gal 9.3-14.5 L 2.5-3.8 gal 8.8-20.8 L 2.4-5.5 gal 10.5 L 2.8 gal 4.1 L 1.1 gal wash temperature 66-71°C 150-160°F 53-66°C 127-150°F 45-50°C 113-122°F 45-55°C 113-131°F 45°C 113°F incoming rinse temperature 72°C 162°F 70°C 158°F 62°C 144°F 62-69°C 140-156°F 50°C 122°F incoming Speed Perfect cycle time 95-110 min 75-90 min 60-70 min 95-105min n/a n/a water consumption 16.3-20.5 L 16.1-20 L 9.2-12.5 L 16.6-21.1 L n/a n/a 4.3-5.5 gal 4.3-5.3 gal 2.4-3.3 gal 4.4-5.6 gal Half Load cycle time 115 min 95-105 min 75-80 min 90-99 min n/a n/a water consumption 17.9 L 10.2-16.5 L 9.3-12.5 L 10.8-13.9 L n/a n/a 4.8 gal 2.7-4.4 gal 2.5-3.3 gal 2.8-3.7 gal Delicate cycle time 105-110 min 90-105 min n/a 100-120 min n/a n/a water consumption 18.6-24.2 L 13.1-24.5 L n/a 8.8-20.8 L n/a n/a 4.9-6.4 gal 3.5-6.5 gal 2.4-5.5 gal Sanitize cycle time 130-150 min 125-150 min n/a 135-155 min n/a n/a water consumption 18.6-24.2 L 13.1-24.5 L n/a 8.8-20.8 L n/a n/a 4.9-6.4 gal 3.5-6.5 gal 2.4-5.5 gal Note: Only sanitizing cycles have been designed to meet the requirements of 6 for soil removal and sanitization efficacy. There is no intention, either directly or indirectly, that all cycles have passed sanitization performance tests. Operating the Dishwasher Start the dishwasher 1 Press the [On/Off] button. The LED of the last selected cycle flashes. 2 Select a cycle and desired options. 3 Press [Start]. Cancel a cycle 1 Press and hold the [Start] button for approximately 3 seconds until the display reads "0:01". 2 Wait about 1 minute while the dishwasher drains. 3 Open the door and press the [On/Off] button. Interrupt a cycle 1 Press the [On/Off] button to turn the unit off. 2 To resume the cycle, press the On/Off button again. 12