Bosch SHX7PT55UC Instructions for Use - Page 19
Interrupt a cycle, Delay Start, Cycle Completion Signal, Intensive Drying, Auto Power Off - 02
View all Bosch SHX7PT55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Interrupt a cycle 1 Press the [On/Off] button to turn the unit off. 2 To resume the cycle, press the [On/Off] button again. Delay Start You can delay the start of the cycle in one hour increments up to 24 hours. To set delay start: 1 Press the [On/Off] button. Select a cycle. 2 Press the [Delay] button until the displayed time corresponds with your requirements and press [Start] to activate delay start. h:01 = 1 hour delay h:24 = 24 hour delay To cancel delay start: 1 Press the [Delay] button until "h:00" is indicated on the digital display. 2 Press [Start] to save setting. Cycle Completion Signal 1 Open the door and press the [On/Off] button. 2 Hold down the "A" button (see page 17) and press [Start] until the display indicates "d:00". Release both buttons. 3 Press the "A" button until the display shows "b:02". 4 Press the "C" button to increase or decrease the tone "b:00" = OFF and "b:03" = LOUDEST and press [Start] to save setting and close the door. Intensive Drying The final rinse uses a higher temperature which improves the drying results. The running time may increase slightly. To turn intensive drying on: 1 Press the [On/Off] button. 2 Hold down the "A" button and press [Start] until the display indi- cates "d:00". Release both buttons 3 Press the "A" button until the display shows "d:00". 4 Press the "C" button to turn intensive drying on or off. "d:01" = ON and "d:00" = OFF and press [Start] to save setting. Auto Power Off To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be adjusted from P:00 to P:02. To change the factory setting (P:01): 1 Press the [On/Off] button. 2 Hold down the "A" button and press [Start] until the display indi- cates "d:00". Release both buttons. 3 Press the "A" button until the display indicates "P:01". 4 Press the "C" button until the display corresponds with your require- ments. P:00 = dishwasher does not turn off automatically P:01 = dishwasher turns off automatically after 1 minute P:02 = dishwasher turns off automatically after 120 minutes (2 hours) 5 Press [Start] to save the setting. 18