Bosch SHX87PW55N Installation Instructions - Page 5
Avoiding Plumbing/Scalding Hazards - installation manual
View all Bosch SHX87PW55N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
This appliance must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance. Do not use extension cords. Avoiding Plumbing/Scalding Hazards Do not perform any work on a charged hot water line. Serious injury could result. Only qualified plumber should perform plumbing work. Do not attempt any work on the dishwasher hot water supply plumbing until you are certain the hot water supply is shut off. Properly tighten all water connections. Not doing so could result in a leak. Temperatures required for soldering and sweating will damage the dishwasher's base and water inlet valve. If plumbing lines are to be soldered or sweated, keep the heat source at least 6″ (152.4 mm) away from the dishwasher. Check local plumbing codes for approved plumbing procedures and accessories. All plumbing should be done in accordance with national and local codes. If using copper tubing or other material not depicted in this manual for water supply, defer to a licensed plumber for proper installation. 3