Bosch SRX53C15UC Instructions for Use - Page 12
Opening the Detergent Dispenser, Cover, Rinse Agent Dispenser Regulator, Filling the Rinse Agent
View all Bosch SRX53C15UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Adding Detergent and Rinse Agent (continued) Opening the Detergent Dispenser Cover NOTE: To open the detergent dispenser cover, press the blue release in the direction shown in Figure 12. Pressing down on the release tab will not open the cover. Press the blue release tab in the direction shown by the arrow in Figure 12. The cover will slide open to the right. Figure12 Filling the Rinse Agent Dispenser Open the rinse agent dispenser by pressing the cover with your index finger while lifting the tab with your thumb as shown in Figure 13. Figure 13 Return the rinse agent dispenser cover to its shut position and press it firmly so that the cover snaps shut. Refill the rinse agent dispenser when the Refill Rinse Agent indicator " " illuminates on the control panel. NOTE: After filling the rinse agent dispenser, the Refill Rinse Agent Indicator will go out in a few minutes after the dishwasher door is shut. Rinse Agent Dispenser Regulator The amount of rinse agent dispensed can be regulated to control spotting and streaking. The Rinse Agent Dispenser Regulator as shown in Figure 15 leaves our factory set at 4. To adjust the amount of rinse agent dispensed: 1. Open the rinse agent dispenser cover. 2. If your dishes are streaked after washing, turn the regulator to a lower number. 3. If your dishes are spotted after washing, turn the regulator to a higher number. Figure 15 Add liquid rinse agent to the dispenser as shown in Figure 14 until the rinse agent reservoir is full. Wipe up any excess rinse agent that puddles when the dispenser reservoir is full. Figure 14 10 Turn dial to adjust the amount of rinse agent dispensed