Bosch TCA6301UC Use & Care Manual - Page 31

Eliminating minor malfunctions yourself Malfunction ADD BEANS is displayed despite a full bean container. No hot water or steam discharge. Froth insufficient or too runny. Coffee is running a drop at aĂtime. Coffee has no crema" (layerĂof froth). Grinding unit is not grinding coffee beans. Descaling program does not start. Cause Grinder has still not been filled automatically. The beans are too big or too oily - they do not slide into the grinding unit. Nozzle is blocked. Sleeve a on nozzle 13 not in correct position. Unsuitable milk. Degree of grinding too fine. The beans are too oily. Preground coffee too fine. Unsuitable type of coffee. Beans no longer fresh. Degree of grinding not appropriate for coffee beans. Beans are not falling into the grinding unit (too oily). Current programming set to: FILTER YES/NEW or CHANGE FILTER display. System too hot. Remedial action Press the 2 5 button. Use less oily or smaller beans. To remove big beans use a vacuum cleaner. Thoroughly clean nozzle. Push down sleeve a on nozzle 13. Use cold semiĆskimmed milk. Select a coarser degree of grinding. Use less oily beans. Use a coarser ground coffee. To rinse the appliance, follow the instructions Using ground espresso/coffee powder" on page 14, but do not add coffee powder in the duct. Change the type of coffee. Use fresh beans. Optimize degree of grinding. Gently tap the bean container. Set programming to FILTER NO/OLD ć Before descaling the appliance, always remove the filter. Draw off some of the hot water. 31