Bose CineMate 15 Home Theater Owner's guide - Remote - Page 5

Universal Remote Control Programming Guide Customizing the power button You can customize the power button on your remote to power on/off your system, TV and cable/satellite box simultaneously. 1. Program your remote to control your TV and cable/satellite box (see page 4). 2. Press and seconds. simultaneously and hold for ten Both buttons flash three times. Resyncing your cable/satellite box and TV After customizing the power button, your cable/satellite box and TV may become out of sync and not power on/off simultaneously. Use the following steps to resync your system. 1. Press the source button for the device that is out of sync. 2. Press to power on or off the source. 3. Press . Your devices power on or off simultaneously. Switching between sources You can switch from one source to another by pressing the appropriate source button on the remote. In addition to controlling the selected source, the remote always controls the basic speaker functions (on/off, volume, mute) of your system. Note: Before you begin, ensure you have correctly programmed your sources. 1. Press the button for the source you want to control. The source button glows. 2. Press . The source powers on. 3. Press to select the correct input on your TV. You may need to press input for the source. several times to select the TV On some TVs, displays a menu. Use your system remote to choose the correct TV input and close this menu. 5