Bose CineMate GS Series II Owner's guide - Page 8

Svenska Nederlands FItralniaçnaois DEsepuatsñcohl English SYSTEM SETUP The interface module receives commands from the remote control and provides audio input connections for the CineMate® system. The remote control commands allow you to turn the speakers on, change the volume, and mute or turn off the speaker system. 5. Place the interface module: • on a flat surface near the TV and other home theater equipment • within 15 feet (4.6 meters) of the Acoustimass® module • NOT in direct sunlight If you position the interface module on a shelf, make sure the front edge of the module is flush with the front edge of the shelf. If on a high shelf, make sure the front edge of the module extends slightly past the front of the shelf, so the shelf does not block signals from the remote control. Peel the protective film off the lens on the front of the interface module. Note: The remote should have a clear line of sight to the interface module, the TV, and any other equipment it will control. CAUTION: When positioning the interface module, avoid blocking any ventilation openings on the TV or other electronic equipment. Continue with 2 on the next page. 6