Bose L1 Model 1S With B2 Bass Module English Owners Guide - Page 19

English DEDseapunatssñckohl FDItreaulnitaçsnacoihs NeEdsepralañnodl s FSrvaennçsakias Italiano Nederlands Svenska CARE AND MAINTENANCE CARE AND MAINTENANCE Caring for your product Cleaning • Clean the product enclosures using only a soft, dry cloth. • Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia,  or abrasives. • Do not use any sprays near the product or allow liquids to spill into any openings. • If necessary, you may carefully vacuum the grille of the L1® loudspeaker. Getting service For additional help in solving problems, contact Bose® Live Music Customer Service Product and Technical Support Team at (877) 335-2673 or visit our support area online at www.Bose.com/livesound. Troubleshooting If you experience problems while using this product, try the following solutions. If you still can't solve the problem, please call the Bose Live Music Product and Technical Support Team direct at (877) 335-2673 to arrange for service. Recommended troubleshooting tools • Portable voltmeter • XLR and ¼" phone plug cables • Cable tester • B1 bass module 4-wire cable • AC outlet tester • Spare AC power cord Problem What to do System is plugged in, power switch is on, but power LED is off • Make sure you have power at the AC outlet. Try operating a lamp or other equipment from the same AC outlet or test the outlet using an AC outlet tester. • Make sure the power stand's power cord plug is fully inserted into the AC outlet. Power LED is on (green), but no sound • Make sure volume control is turned up on your instrument. • Make sure the Trim level control is turned up on the power stand. • Make sure your instrument is plugged into the Analog Input jack. • Connect your instrument to the power stand using a different cable. • Plug your instrument into a different amplifier to make sure the instrument is working. Power LED is red while the • Please call Bose Live Music Customer Support at (877) 335-2673 for assistance. power stand is on House circuit breaker keeps tripping • If more than one power stand is plugged into the same AC circuit, stagger the turn-on times. Each power stand has an inrush current of about 32 amps when turned on. • If you have more than three power stands plugged into a single 15 amp circuit, move some systems to another AC circuit. Each power stand can draw 5 amps or more when playing at high volumes for long periods of time. 19 Venice_Care+Maint.fm 4/12