Bose Lifestyle 38 Bose® link AL8 homewide wireless audio link - Owner - Page 6
Choosing a place for each unit - receiver
View all Bose Lifestyle 38 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English Español Français INTRODUCTION Figure 2 Connection panels on the two units What distinguishes the two units The connection panel on each unit identifies it by name: TRANSMITTER or RECEIVER. Two Bose® link jacks and a Channel button further distinguish the transmitter. For compatibility, the two units have a matching Setup Code, set at the factory with both switches in the "up" position (Figure 2). A Status LED lights when each unit is plugged in and the two units are communicating. Transmitter Receiver Bose® link jacks Channel switch Bose link jack Status LED Note: For information on the meaning of the different Status LED lights, refer to "Check the indicators and settings" on page 8. Choosing a place for each unit Place the transmitter in the same room with the LIFESTYLE® system media center. Place the receiver in the same room with your Bose link expansion product. Note: Use of the audio link with products that are not Bose link compatible requires an adapter cable. For further information, refer to "Instructions for non-Bose or older Bose products" on page 7. Considerations for positioning: • Place each unit upright with all feet flat on a level surface, such as a floor, table, or shelf. • Do not tip either unit on its side. • Place each unit within 7 feet (2 meters) of the product to which it is connected (using the supplied Bose link A cable). • Keep the two units within 80 feet (24 meters) of each other. • Be aware that the strongest signal direction is above and around, not below, the transmitter. 5