Bose Lifestyle 535 Series II Home Entertainment Installation Guide - Page 16
For Jewel Cube, speakers, For Direct/Reflecting, Virtually Invisible, single, cube speakers, Notes, - system black
View all Bose Lifestyle 535 Series II Home Entertainment manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
System Setup H. Connect the speaker cable to the type of speaker you have. For Jewel Cube® speakers: Insert the plug into the speaker connector. For Direct/Reflecting® and Virtually Invisible® single cube speakers: Press the button and insert the wires. Connect the red-collared wire to the red connector. Connect the other wire to the black connector. Notes: • The rear speaker cables for Direct/Reflecting® and Virtually Invisible® single cube speakers are webbed together. You can pull them apart as needed. • Put the Acoustimass® module in its final position: -- Upright (BEST) or on either side (ALTERNATE). -- With the front opening facing into the room. -- At least 18 in (45 cm) from any TV to avoid magnetic interference with the TV image. Move it farther away if you still notice interference. CAUTION: • Do not put electronic media, such as video or audio tapes, on or next to the Acoustimass® module for long periods of time. The magnetic field surrounding the module may erase some or all of the recorded material. • DO NOT BLOCK the ventilation openings on the module. This can cause it to overheat. Ventilation openings I. Congratulations! At this point you have set up the control console, the Acoustimass® module, and the speakers. You are now ready to turn on your system and enter the interactive phase of the setup process using the UNIFY® intelligent integration system. Continue with Box 4 on the next page. 16 - English