Bose SoundLink Bluetooth Speaker III Owner's guide - Page 13

Operation Connecting a device using the AUX connector You can use your speaker with any device that ­features a headphone or audio ­output. This feature requires using a stereo audio cable with a 3.5 mm plug on one end to­connect to the AUX IN input on the speaker. This type of cable is ­available for ­purchase at electronics stores. To use the AUX IN connector: 1. Plug the cable from your audio device into the AUX IN connector on the back of the speaker. 2. Press Power on the speaker. 3. Press AUX on the speaker. 4. Adjust the volume on the connected device to near maximum, then use the speaker volume buttons to adjust the volume level. Notes: • If the connected device stops playing audio for 30 minutes, the speaker ­automatically turns off to conserve battery power. • The SERVICE connector on the back of the speaker is only for software updates. It cannot be used to connect an audio device. English - 13