Bose Videowave III Entertainment Installation Guide - Page 8
Physical Setup
View all Bose Videowave III Entertainment manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Physical Setup Here is what you need from Box 1: 11 Monitor AC power cord Monitor cable* Placing the monitor with the stand Before you place the monitor, attach the stand. 1. Unpack the stand, stand screws, and monitor. 2. Lower the monitor onto the stand, carefully lining up the holes in the bottom of the monitor with the supports on the stand. WARNING: The 46 in. monitor weighs 120 lbs. (54 kg). The 55 in. monitor weighs 135 lbs. (61 kg). To prevent personal injury, a two-person lift is required. Anti-tip straps Anti-tip strap screws (4) *The supplied monitor cable is not rated for in-wall use. In-wall monitor cables are available from Bose or a Bose authorized dealer. You also need the stand, screws, and wrench: Hex wrench Stand screws (2) Monitor support Monitor stand 8 - English Monitor support