Bose Wave €" SoundLink Wave® music system owners guide - Page 25

English Español Français Personalizing Your Wave® Music System Setting the room code Your Wave® music system comes from the factory ready to operate as a second room (room code B) when connected to a Bose® link enabled Lifestyle® system. If you want to use your Wave® music system with your Lifestyle® system beyond a second room you will need to change the room code to match that of the remote control you are using for that room. Refer to your Lifestyle® system owner's guide for more information on room codes. Alarm Time 1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed. Menu Tune/MP3 Time 2. Press Tune/MP3 > six times until ROOM- B is displayed. The dashes following the room letter indicate how the microswitches should be set on the Lifestyle® remote control. 3. Press Time - or Time + to select a room code other than room B. Alarm 4. Press Alarm Time (Menu) to exit the setup menu or wait 10 seconds for the setup menu Time to end automatically. Menu Performing a system reset If you wish, you can restore your Wave® music system to the original factory settings. Alarm 1. Press and hold Alarm Time (Menu) until -SETUP MENU- is displayed. Time Menu Tune/MP3 2. Press Tune/MP3 > seven times until RESET ALL- NO is displayed. Time 3. Press Time - or Time + to change RESET ALL- NO to RESET ALL- YES. 4. When PRESS 2 TO CONFIRM appears on the display, press Presets button 2. When the reset is complete, DEFAULTS RESET is displayed. Alarm Time 5. Press Alarm Time (Menu) to exit the setup menu or wait 10 seconds for the setup menu to end automatically. Menu 23