Bose Wave €" SoundLink Wave® music system multi-CD changer - Ow - Page 8

English Español Français Setup Selecting a location for your system Your Multi-CD Changer is designed to fit directly under your Wave® music system. Before you connect the Multi-CD Changer to the Wave® music system, select a good location for the complete system using the following guidelines. • Place the system on a table or other flat surface. • To enjoy maximum performance, place the system across the room from where you will be listening. • Place the system within two feet of a wall, and avoid placing it directly in a corner. CAUTION: DO NOT place your system on a heat-sensitive surface. Like all electrical equipment, it generates some heat. CAUTION: DO NOT use your system in a damp location or any other place where moisture can get inside. Note: DO NOT place your system on a metal surface. It could interfere with AM reception. Seating your Wave® music system on the Multi-CD Changer With the changer placed in your chosen location, carefully set your Wave® music system on top of the changer. • Make sure the rear feet of the Wave® music system fit into the recesses on top of the changer. • Make sure the Wave® music system sits flat and the side edges of both units are aligned. 6