Bose Wave IV Owner s guide - Page 11

Alarm buttons and indicators The system has two alarms, Alarm 1 and Alarm 2. Each alarm can be set for: • Time • Volume • Wake-up source: buzzer, radio, or CD Using the Alarm buttons Using the Alarm buttons on the bottom of the remote you can setup and operate each alarm: Press to turn Alarm 1 on or off. 1. Press to activate the Alarm Setup mode and view Alarm 1 settings. 2. Press again to view Alarm 2 settings. Press to turn Alarm 2 on or off. 3. Press again to exit the Alarm Setup mode. Alarm status indicators The upper right-hand corner of the display shows the alarm status indicators if the alarm is set. Example with Alarm 1 and 2 set: Alarm 1 time Alarm 1 AM PM Alarm 2 AM PM Alarm 2 time Setting the alarms You can choose the settings for each alarm by activating the Alarm Setup mode and displaying the settings for each alarm. To setup Alarm 1 or 2: 1. Press Alarm Setup . The alarm number and time start flashing (A) and after a moment, the current Alarm 1 settings are displayed (B). A B Setting and Using the Alarms 3. Select your wake-up source: • BUZZER is the factory alarm setting. • Press to choose a radio station. • Press to choose a track. 4. Press or to set the volume level of the selected wake-up source. 5. Press to enter the Alarm 2 setup mode. Repeat Steps 2-4 to set up Alarm 2. 6. Press again to exit the Alarm Setup mode. The alarm you set is turned on and the alarm time displays: Alarm number and time Using the alarms Turning an alarm on or off Press or to turn the selected alarm on or off. When an alarm is turned on, the alarm number and time appear in the upper right corner of the display. Alarm number and time Snoozing an alarm Tap the touch pad , ® or press on the remote. SNOOZE is displayed for the duration of the selected snooze time and then the alarm sounds again. The snooze time is set at the factory to 10 minutes. To change the snooze time, see page 14. Stop and reset a sounding alarm Press . Reset a snoozed alarm for the next day After snoozing the alarm, place your hand on the touch pad again and hold it there for at least 2 seconds, or press Stop Alarm. 2. Using the Time buttons, set the alarm time. English - 11