Brother International 2460N Quick Setup Guide - English - Page 2
Parallel, Windows, Network, Macintosh - hl
UPC - 012502600787
View all Brother International 2460N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Step 5 Print a test page. Unfold the tray extension flap REDAY Data Back Reprint Set Job cancel Go ON OFF ON OFF 1 Make sure that the printer power switch is off. Connect the AC power cord to the printer. Do NOT connect the interface cable. 2 Plug the AC power cord into an AC outlet. Turn the power switch on. 3 After the printer has finished warming up, the READY message appears. PRINTING Data Back Reprint Set Job cancel Go Note: When you are ready to set the Control Panel message language, refer to the Control Panel section at the bottom of this sheet. 4 Press the Go switch. The printer prints a test page. Check that the test page has printed correctly. Follow the instructions for your interface cable and operating system. For Parallel interface cable users (For Windows® users only) Step 6 Connect the printer to your PC & Install the printer driver. 1 Click "Connect the interface cable and install the printer driver / utilities." 2 Select the parallel interface cable. ON OFF 3 Turn the printer power switch off. ON OFF 4 Connect the interface cable to your PC, and then connect it to the printer. 5 Turn the printer power switch on. Note: If "Add New Hardware Wizard" appears, click the Cancel button. 6 Click the Next button. 7 Click the Finish button. The setup is now complete. For USB interface cable users (For Windows® users only) Step 6 Install the driver & Connect the printer to your PC. For Macintosh® users If you print from a Macintosh computer, you will have to connect it to the printer via a Network (Brother recommends using the NC-4100h network board). Note: When "Add New Hardware Wizard" appears on your PC, click the Cancel button. Note: Install the driver before you connect the USB interface cable to the printer. If you have already connected it, remove it. 1 Click "Connect the interface cable and install the printer driver / utilities." 2 Select the USB cable. Follow the on-screen instructions. 3 Click the Next button. 4 Click the OK button. ON OFF 5 Make sure the printer power switch is on. 6 Connect the USB interface cable to your PC, and then connect it to the printer. For Windows® 98/Me users: The setup is now complete. For Windows® 2000 users: Go to Step 7. Step 7 (For Windows® 2000 users only) Set up your PC printer port. 1 After your PC has restarted, click Start, Setting and Printers. 2 Select the Brother HL-2460 series (copy2) icon. 3 Click the File menu, and then select Set as Default printer. The setup is now complete. For Network users If you want to connect your printer using a Network cable, refer to the Quick Network Setup Guide. After the administrator has made the required settings, install the driver referring to the "Installing the Driver for Network users" section of the Quick Network Setup Guide. Control Panel Data Back Reprint Set Job cancel Go For more information, see "CONTROL PANEL" in Chapter 3 of the User's Guide on the supplied CD-ROM. Data LED : Orange On Data remains in the printer buffer. Blinking Receiving or processing data. Off No remaining data. Switches Go Job Cancel Reprint Menu Set Back Exit from the control panel menu, reprint settings and clear error messages. Pause / Continue printing. Stop and cancel the printer operation in progress. Select the reprint menu. Move forward and backward through menus. Move forward and backward through menus. Select the control panel menu. Set the selected menus and the settings. Go back one level in the menu structure. Language Setting (Default is English) 1. Select the SETUP mode by pressing the + switch, and then press the Set switch. 2. Check that the LANGUAGE message appears, and then press the Set switch. 3. Choose your language by pressing the + or - switch, and then press the Set switch. An asterisk mark (*) appears at the end of the display. (You can return to the READY status by pressing the Go switch.) Note 1. A real time clock is built into this printer. Set the time referring to Chapter 3 of the User's Guide on the CD-ROM. You need to set the time before you can use the log management and reprint functions. 2. Please enhance the RAMDISK size when you want to use the reprint functions without the optional HDD or CompactFlash. See RAM expansion in Chapter 4 of the User's Guide.