Brother International 420CN Quick Setup Guide - English - Page 27
For Network Interface Cable Users (MFC-420CN, MFC-620CN only), For Mac OS® X 10.2.4 or greater - mfc printer
UPC - 012502610847
View all Brother International 420CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Setting Up the Machine Installing the Driver & Software Mac OS® 8.6 - 9.2 For Network Interface Cable Users (MFC-420CN, MFC-620CN only) For Mac OS® X 10.2.4 or greater Make sure that you have completed the instructions from Step 1 "Setting Up the Machine" on pages 4 - 11. 1 Turn off and unplug the machine from the AC outlet and disconnect it from your Macintosh® if you already connected an interface cable. 6 Follow the on-screen instructions, and restart your Macintosh®. 7 After the DeviceSelector window appears, connect the network interface cable to your Macintosh® and then to the machine. 2 Turn on your Macintosh®. 3 Insert the supplied CD-ROM into your CD-ROM drive. The DeviceSelector window will not appear if you have also connected a USB interface cable to the machine before restarting your Macintosh® or if you are overwriting a previously installed version of the Brother Software. If you encounter this problem continue with skipping steps 10 through 12 and then see the Software User's Guide Chapter 8 for details on selecting what machine the ControlCenter2.0 will connect with. 4 Double-click the Start Here OSX icon to install the printer driver and Remote Setup program. If the language screen appears, select your language. 5 Click MFL-Pro Suite to install. To connect the network interface cable to the machine: 1. Open the scanner cover to its open position. 2. Insert the network cable into the LAN socket, marked with a symbol. You will find the LAN socket above and to the left of the ink cartridge slots, as shown below. Macintosh® Network For Network Users Continued... 25