Brother International 7150C Users Manual - English - Page 110

95 M E S S A G E C E N T E R ( F O R M F C 7 1 6 0 C O N L Y ) If the VOICE and/or Fax Indicator lights are flashing, there is a new message stored. Once a new voice message is played, the VOICE indicator light stops flashing and stays on. And once a new fax message is printed, the Fax indicator light will turn off. Voice Fax The LCD display will indicate the total number of incoming VOICE and/or FAX messages stored in Message Center memory. The number of VOICE includes the Memo messages. VOICE:03 FAX:02 ONLINE Playing Voice Messages and Memos Follow the steps below to listen to voice messages and memos. 1 Press Play . Adjust Volume by pressing or . All messages and memos are played in the order they were recorded. The display shows the number of the current message, and the total number of messages. If Caller ID information was received, the MFC beeps during the message and displays the Caller ID information for one second. During playback, the screen displays the time and date the message was recorded. 2 Press at the end of the message to repeat a message. Press to skip to the next message. You can press and repeatedly until you reach the message you want to play. 3 Press Stop to exit. Printing a Fax Message Once you print a new fax message stored in memory, it is erased from the memory automatically. 1 Press Play . After two seconds, the MFC begins to play voice messages. 2 After playing voice messages, the display asks if you want to print fax messages that are in the memory. There is no display message if there are no faxes. PRINT FAX? 1.YES 2.NO