Brother International 790CW Quick Setup Guide - English - Page 33
Confirm your network environment (Infrastructure Mode) - wireless setup
UPC - 012502620501
View all Brother International 790CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
For Wireless Network Users 24 Confirm your network environment (Infrastructure Mode) The following instructions will offer two methods for installing your Brother machine in a wireless network environment. Both methods are for infrastructure mode, using a wireless router or access point that uses DHCP to assign IP addresses. Choose a configuration method and proceed to the page indicated. a If your wireless router/access point does not support SecureEasySetup™, Wi-Fi Protected Setup™ or AOSS™, write down the wireless network settings of your access point or wireless router in the area below. Important If you do not know this information (Network Name, WEP key or WPA2-PSK (Pre-Shared Key)), you cannot continue the wireless setup. You should see the documentation provided with your access point or wireless router, consult the router manufacturer, or your system administrator. SSID (Service Set ID or Network name) Authentication (Open System or Shared Key)/Encryption Type (None or WEP) WEP Key (if needed) 1 WPA/WPA2-PSK Encryption type (TKIP or AES) (if needed) 2 WPA/WPA2-PSK (Pre-Shared Key) (if needed) 2 1 The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know this information you should see the documentation provided with your access point or wireless router. This key is a 64bit or 128-bit value that must be entered in an ASCII or HEXADECIMAL format. For example: 64-bit ASCII: 64-bit Hexadecimal: 128-bit ASCII: 128-bit Hexadecimal: Uses 5 text characters e.g. "Hello" (this is case sensitive) Uses 10 digits of hexadecimal data e.g. "71f2234aba" Uses 13 text characters e.g. "Wirelesscomms" (this is case sensitive) Uses 26 digits of hexadecimal data e.g. "71f2234ab56cd709e5412aa3ba" 2 WPA/WPA2-PSK is a Wi-Fi® Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using TKIP or AES encryption (WPA-Personal). WPA/WPA2-PSK (TKIP or AES) uses a Pre-Shared Key (PSK) that is 8 or more characters in length, up to a maximum of 63 characters. See the Network User's Guide for more details. Now go to page 34 b If your wireless router/access point supports automatic wireless (one-push) setup (SecureEasySetup™, Wi-Fi Protected Setup™ or AOSS™) Wireless Network Now go to page 36 33