Brother International AX475 Owner's Manual - English - Page 38
Replacing, Ribbon
View all Brother International AX475 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
PART V TECHNICAL INFORMATION REPLACING THE RIBBON, ETC. Replacing the cassette ribbon Three types of ribbons are available: Ribbon Type Correctable film ribbon Multi strike ribbon Nylon ribbon Brother Model 1030 or 1230 1031 1032 To replace the cassette ribbon: 1) Use [SPACE BAR] or [BACKSPACE] to move the carrierto the center of the platen. 2) Open the top cover. 3) Holding the cassette with both hands, lift the front of the cassette up and out. 4) Move the cassette towards the platen to remove it. 5) Turn the feed knob (on the left side of the Front cassette) counter-clockwise to tighten the ribbon in the new cassette. 6) Align the arrow on the cassette with the arrow on the cassette holder. Use both Back hands to ease the cassette into the holder, back first. 7) Gently press down on the front of the cassette until it clicks into place. 8) Again turn the feed knob counter-clockwise to take up any slack, 9) Close the top cover. O 10) Press [CODE] + [RESET] (0) to move the carrier to the previous position. • Theamountoftaperemainingcanbe checked through the viewingholeontherightsideofthe cassette. • Make sure touse onlyBrother-authorizedcassette ribbons, correction tapes and cassette daisy wheels. Brother cannot be heldresponsible fordifficulties causedbythe use ofunauthorized supplies. Note: Please do not touch the keyboard during replacing the daisy wheel, cassette ribbon or correction tape in order to avoid carrier movement. 36