Brother International BAS-311G Basic Instruction Manual - English - Page 38

5. USING THE OPERATION PANEL (BASIC OPERATIONS) 5-7. Setting the work clamp lift amount The setting for the work clamp lift amount can be changed using the operation panel. * For pneumatic work clamp specifications, only threading mode and intermittent presser foot height setting mode will be available. 1 All indicators switch off Press the THREAD/CLAMP key. The sewing machine will switch to threading mode. • " 1" will appear in the PROGRAM No. display, and the work clamp will drop. 2 THREAD/CLAMP indicator illuminates MENU indicator switches off Motor-driven work clamp specifications only 4445Q Press the key. The sewing machine will switch to work clamp height setting mode. • " 2" will appear in the PROGRAM No. display, and the work clamp will rise to the setting value that appears in the menu display. (Work clamp height setting: 15 − 25) Press the or key to set the work clamp height. • The work clamp will rise or drop to the height of the new value that has been set. 5224Q When memory switch No. 003 is set to "2" Press the key. The sewing machine will switch to intermediate work clamp height setting mode. • " 3" will appear in the PROGRAM No. display, and the work clamp will move to the setting value that appears in the menu display. (Intermediate work clamp height setting: 1 − 15) Press the or key to set the intermediate work clamp height. • The work clamp will rise or drop to the height of the new value that has been set. 4959Q NOTE: When setting the work clamp height and the intermediate presser foot work clamp height, check that the slider (1) is touching the work clamp lifter plate assembly (2). 5254Q 30 BAS-300G, BAS-311G, BAS-326G