Brother International BAS-326EL Programmer Instruction Manual - English - Page 185
Input the magnification in 3 digits in the X direction and press
View all Brother International BAS-326EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Chapter 3 Programming with Command Function Resizing Command to be used 8 8 8M F M Resizing a pattern in the X and Y directions Used to input magnification in the X direction. Used to input magnification in the Y direction. This function is available only when the needle is at the home position. 1. Make sure that the needle is at the home position. Press R if the needle is not at the home position. 2. Determine the reference point for resizing with . 3. Input 8 8 8 M . 4. Input the magnification in 3 digits in the X direction and press F . Magnification values of 0 - 400 are available for input. 5. Input the magnification in 3 digits in the Y direction and press M . Magnification values of 0 - 400 are available for input. 184 Programmer
Programmer
184
Chapter 3 Programming with Command Function
Resizing
Command to be used
M
8
8
8
Resizing a pattern in the X and Y directions
F
Used to input magnification in the X direction.
M
Used to input magnification in the Y direction.
This function is available only when the needle is at the home position.
1.
Make sure that the needle is at the home position.
Press
R
if the needle is not at the home position.
2.
Determine the reference point for resizing with
.
3.
Input
M
8
8
8
.
4.
Input the magnification in 3 digits in the X direction and press
F
.
Magnification values of 0 - 400 are available for input.
5.
Input the magnification in 3 digits in the Y direction and press
M
.
Magnification values of 0 - 400 are available for input.