Brother International BAS-364 Programmer Instruction Manual - English - Page 30
Lines, Programming
View all Brother International BAS-364 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Lines Chapter 2 Programming with Help Function The pattern with lines is programmed. The example in the left is used for explanation of programming. Programming 1. Press P . 5IF XPSL DMBNQ NPWFT UP UIF IPNF QPTJUJPO BOE UIF QSPHSBNNFSTDSFFOJTEJTQMBZFE 2. Select with and press . 3. Move the work clamp with . Press when the needle point is at point A of the pattern. 5IFGJSTUTUJUDI QPJOU" JTQSPHSBNNFE 4. Select with and press . 5. Input the stitch length and press . NNJTJOQVUJOUIFFYBNQMF *OQVUUPNBLFUIFTUJUDIMFOHUIUPNN 6. Move the work clamp with . Press when the needle point is at point B of the pattern. 7. Repeat step 6 and create the program to point E. 8. When point E is programmed, press ESC twice. Programmer 29
Programmer
29
Chapter 2 Programming with Help Function
Lines
The pattern with lines is programmed.
The example in the left is used for explanation of
programming.
1
Programming
1.
Press
P
.
The work clamp moves to the home position and the
programmer screen is displayed.
2.
Select
with
and press
.
3.
Move the work clamp with
. Press
when the needle point is at point A of the
pattern.
The first stitch
(point A)
is programmed.
4.
Select
with
and press
.
5.
Input the stitch length and press
.
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
6.
Move the work clamp with
. Press
when the needle point is at point B of the
pattern.
7.
Repeat step 6 and create the program to
point E.
8.
When point E is programmed, press
�
ESC
ESC
twice.