Brother International BAS-366E Instruction Manual - English - Page 46

Checking the input voltage, 9. Clearing all memory settings

Get Brother International BAS-366E PDF manuals and user guides View all Brother International BAS-366E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Chapter 7 STANDARD ADJUSTMENTS 8. Checking the input voltage 1. Turn on the power switch. 2. Press the menu switch q until the X-SCALE indicator w illuminates. q¡ w 3. While pressing the TEST switch e, press the R/W switch r. e r 4. If the input voltage is normal, the input voltage conditions will be shown in the display as indicated at right. Rated voltage: "100" Allowable voltage range: "090" - "110" 5. Press the TEST switch e once more to return the display to the regular condition. 9. Clearing all memory settings If the sewing machine stops operating normally, the cause may be that an incorrect memory setting may have been made by means of the memory switch, for instance. In such cases, carry out the following procedure to clear the memory, and also check the DIP switch settings. 1. While pressing the R/W switch, turn on the power. 2. When the alarm sounds with a short beep, release the R/W switch. ON OFF Power switch BAS-364E, 366E, 370E, 375E 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
40
Chapter 7
STANDARD ADJUSTMENTS
BAS-364E, 366E, 370E, 375E
8. Checking the input voltage
1. Turn on the power switch.
2. Press the menu switch
q
until the X-SCALE indicator
w
illuminates.
3. While pressing the TEST switch
e
, press the R/W switch
r
.
4. If the input voltage is normal, the input voltage conditions will be shown in the display as indicated at right.
Rated voltage: “100”
Allowable voltage range: “090” - “110”
5. Press the TEST switch e once more to return the display to the regular condition.
9. Clearing all memory settings
If the sewing machine stops operating normally, the cause may be that an incorrect memory setting may have been
made by means of the memory switch, for instance. In such cases, carry out the following procedure to clear the
memory, and also check the DIP switch settings.
1. While pressing the R/W switch, turn on the power.
2. When the alarm sounds with a short beep, release the R/W switch.
q¡
w
r
e
ON
OFF
Power switch