Brother International BE-1201B-AC Programming the machine settings - English
Brother International BE-1201B-AC Manual
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BE-1201B-AC manual content summary:
- Brother International BE-1201B-AC | Programming the machine settings - English - Page 1
BE-1201B, 901E-AC For Technical Assistance Please Call Toll Free 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx If your machine settings have not been programmed or if a "hard reset" has been completed (necessitating reprogramming), - Brother International BE-1201B-AC | Programming the machine settings - English - Page 2
Settings Programming starts: Press the key twice. Allow time for the display to react to the first keystroke. The screen should appear as such: Press the key, which will highlight the icon to the right. The Display should appear as such: Press the Page): key. The Display should appear as such - Brother International BE-1201B-AC | Programming the machine settings - English - Page 3
Press the key. The screen should appear similar to such: The Thread Break feature has now been programmed. Press the key. The display should appear similar to: Press the key so the icon is highlighted. The display should appear as such (Next Page): 3 - Brother International BE-1201B-AC | Programming the machine settings - English - Page 4
Press the key. The display should appear as such: There are six speed ranges that can be programmed. The programming will be set from a high speed of 1000 SPM (Stitches per Minute) to 500 SPM, decreasing in 100 SPM increments. The image displayed above, shows the speed of ranges 1, 2, & 3. The - Brother International BE-1201B-AC | Programming the machine settings - English - Page 5
sixth speed range. The six speed ranges should now be programmed as 1000, 900, 800, 700, 600 & 500 SPM. Press the key 5 times, pausing to review each programmed value as you scroll. Verify each setting increases by a value of 100 SPM as you press the key. You may press the number - Brother International BE-1201B-AC | Programming the machine settings - English - Page 6
Press the key. The display should appear as such: Press the key twice so the icon is highlighted. Let the display react to the first keystroke before pressing the second time. The display should appear as such: key the Press the key to change the trace from rectangular to octagonal. The - Brother International BE-1201B-AC | Programming the machine settings - English - Page 7
Press the key. The display should appear as such: Press the key once. The display should appear as such: Press the Page): key. The display should appear as such (Next 7 - Brother International BE-1201B-AC | Programming the machine settings - English - Page 8
break, or how many times it will beep. Press the arrows to scroll through the choices. Most operators prefer the setting of "5", so the machine will alert them when a thread break occurs, but stop beeping after five beeps. When the "5" is selected, the screen should appear as such: Press - Brother International BE-1201B-AC | Programming the machine settings - English - Page 9
Press the key until "0.2" replaces the word "OFF". Each time one of the keys is pressed, the value will increase or decrease by 0.1 mm. The display should appear as such: Press the key. The display should appear as such: Press the key so the icon is highlighted. The display should appear - Brother International BE-1201B-AC | Programming the machine settings - English - Page 10
Press the key. The display should appear as such: Each icon will have a slash through it as shown in the first icon. Press the key. The slash will be removed from the first icon. Press the key & then the second icon. key to remove the slash from the Press the key & then the key to remove the - Brother International BE-1201B-AC | Programming the machine settings - English - Page 11
Press the key. The display should appear as such: Press the key so the should appear as such: key is highlighted. The display Press the key. The display should appear as such: Press the Page): key. The display should appear as such (Next 11 - Brother International BE-1201B-AC | Programming the machine settings - English - Page 12
Press the key until the 0.0 value changes to 0.9 (1.1 for caps- explained on page 13), and press the key until the 1200 value changes to 700 (600 for caps). You are able to press any of the keys to increase or decrease both values. The display should appear as such: Press the key. The display - Brother International BE-1201B-AC | Programming the machine settings - English - Page 13
slashes, activating the feature. The recommended settings are 1.1 mm and 600 SPM. Use the keys to set those values. Press the key to accept the new settings. Press the key to return to the main screen. If the machine is to continue in the tubular/flat mode, power off and turn the - Brother International BE-1201B-AC | Programming the machine settings - English - Page 14
differently on your machine panel, due to possible updates or changes in current machine firmware, (version 5.12 as of January 2009). For help or questions about these settings, please contact Brother Technical Service at 877-427-6843, or email Brother Technical Support at: [email protected] 14
If your machine settings have not been programmed or if a “hard
reset” has been completed (necessitating reprogramming), these
instructions will walk you through programming the settings list.
PLEASE READ THESE INSTRUCTIONS
COMPLETELY BEFORE ATTEMPTING
ANY OF THESE PROGRAMMING STEPS.
To reset the machine to the default settings:
1. “Power off” the machine.
2. Press and hold the
key on the panel.
3. “Power on" the machine.
Release the
key after the machine completes the “boot-up”
process.
4.
Press the
key, when it is available on the
display
.
Let the machine complete the deletion process
before continuing.
For Technical Assistance Please Call Toll Free
1-877-4BROTHER
Email:
Website
:
B
B
E
E
-
-
1
1
2
2
0
0
1
1
B
B
,
,
9
9
0
0
1
1
E
E
-
-
A
A
C
C
1