Brother International BE-1201B-AC Programming the machine settings - English - Page 13

Power ON - used

Get Brother International BE-1201B-AC PDF manuals and user guides View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

The screen should appear as such: The Short Pit speed limit feature will have to be programmed again when the CAP mode is selected. Power off the machine, and change the black frame mode switch from FLAT to CAP. Power "ON" the machine and press the twice, (allow time for the screen to accept each key selection). Press the key until the short pit speed limit feature is selected. Press the key. Press the key to remove the slashes, activating the feature. The recommended settings are 1.1 mm and 600 SPM. Use the keys to set those values. Press the key to accept the new settings. Press the key to return to the main screen. If the machine is to continue in the tubular/flat mode, power off and turn the frame mode switch back to the "Flat" position. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
The screen should appear as such:
The Short Pit speed limit feature will have to be programmed again
when the CAP mode is selected.
Power off the machine, and change
the black frame mode switch from FLAT to CAP.
Power “ON” the
machine and press the
twice, (allow time for the screen to
accept each key selection).
Press the
key until the short pit
speed limit feature
is selected.
Press the
key.
Press
the
key to remove the slashes, activating the feature.
The
recommended settings are 1.1 mm and 600 SPM.
Use the
keys to set those values.
Press the
key to accept the new settings.
Press the
key to return to the main screen.
If the machine is to continue in the tubular/flat mode, power off and
turn the frame mode switch back to the “Flat” position.
13