Brother International BE-1201B-AC Power Supply Replacement - English
Brother International BE-1201B-AC Manual
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BE-1201B-AC manual content summary:
- Brother International BE-1201B-AC | Power Supply Replacement - English - Page 1
: Models: Replacing Power Supply Board February 25, 2009 BE-901, BE-901-PC, BE-1201, BE-1201-PC, BES-916, BES-1216 1. Make sure machine is OFF and Unplugged. 2. Remove cover assy. (Six screws removed "A", Three loosened "B") A B A A A A A 3. Identifying Main Bord. (Also: Power Supply, and - Brother International BE-1201B-AC | Power Supply Replacement - English - Page 2
4. Unplugging all wire connector harnesses. P1, P2, P3, P4, P5, and P6. 5. Unplug all connectores to remove board. However, keep in mind that connectors only go in one spot and can not be confused. 6. Board is held inplace by plastic clip locks. In order to unlock you will need to squeese locks - Brother International BE-1201B-AC | Power Supply Replacement - English - Page 3
for before installing. A. Fuses: If the new board is missing fuses remove from old board to install on new board. 8. Installing board, please follow reverse instructions of removal. 9. After board is installed and all plugged in you are ready to plug machine into outlet and turn on for operation. 3
1
Technical Reference
Title:
Replacing Power Supply Board
Date:
February 25, 2009
Models:
BE-901, BE-901-PC, BE-1201, BE-1201-PC, BES-916, BES-1216
1. Make sure machine is OFF and Unplugged.
2. Remove cover assy.
(Six screws removed
“A”
, Three loosened
“B”
)
3. Identifying Main Bord. (Also: Power Supply, and Head Board)
A
A
A
A
A
A
B
Power Supply
Main Board
Head Board
Main Board
Head Board
Power Supply