Brother International BES-1240BC Knife Adjustments - English - Page 2
cover by removing the 6 screws as indicated in the photo below.
 |
View all Brother International BES-1240BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
After you have checked and adjusted, if necessary, the fixed knife. Now we can check the moving knife. The tip of the moving knife should protrude past the edge of the fixed knife 1 mm as illustrated by the photo below. 1mm If you find the moving knife needs to be adjusted. You will need to remove the arm cover by removing the 6 screws as indicated in the photo below. Screws 2
-
1 -
2 -
3
 |
 |
2
After you have checked and adjusted, if necessary, the fixed knife. Now we can check the
moving knife. The tip of the moving knife should protrude past the edge of the fixed knife
1 mm as illustrated by the photo below.
If you find the moving knife needs to be adjusted. You will need to remove the arm
cover by removing the 6 screws as indicated in the photo below.
1mm
Screws