Brother International BES-1240BC Maintenance Schedule - English
Brother International BES-1240BC Manual
View all Brother International BES-1240BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BES-1240BC manual content summary:
- Brother International BES-1240BC | Maintenance Schedule - English - Page 1
,1263 For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Perform all maintenance with the machine OFF Daily Maintenance Cleaning Oiling Rotary hook 1. Open bobbin case covers and remove - Brother International BES-1240BC | Maintenance Schedule - English - Page 2
.aspx Weekly Maintenance Oiling Needle Bars 1. Remove the front plate that has the "BROTHER" logo on it by removing one screw and loosening the other. The plate will now slide off to the side. Do this for all the heads. Thread take up bushing and connecting rod 1. Place 5-6 drops of oil in - Brother International BES-1240BC | Maintenance Schedule - English - Page 3
Technical Assistance Please Call Toll Fre e 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Monthly Maintenance Cleaning Knives Control Box 1. a brush or compressed air. Do this for all heads. 3. Re-install needle plates. 5/24/05 3 - Brother International BES-1240BC | Maintenance Schedule - English - Page 4
For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Monthly Maintenance Greasing 1. Remove the covers between each head by removing the four screws. Cam grooves 3. Remove the cover to the - Brother International BES-1240BC | Maintenance Schedule - English - Page 5
the arm cover on the heads if the machine has them by removing the 2 screws. Cover is not shown in photo. 8. Reinstall arm covers if supplied. Manually color change the machine to needle 1 by rotating the knob underneath the color change box. Remove the presser foot guides by removing the 3 screws - Brother International BES-1240BC | Maintenance Schedule - English - Page 6
down smoothly. Do this for all of the heads. 10. Using the black grease, grease the work clamp cam for each head. 12. Manually color change to needle 5 if it is a 9 needle machine or 6 if it is a 12 needle machine. Reinstall head covers, right cover on head 1 and left cover on head 6. 5/24/05 6 - Brother International BES-1240BC | Maintenance Schedule - English - Page 7
e 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Monthly head 3. X cover. Removing the X-axis cover is machine specific depending on whether it is a 4 or 6 head machine. Please consult your instruction book for detailed instructions - Brother International BES-1240BC | Maintenance Schedule - English - Page 8
For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance Greasing Heads 1. Remove the covers between each head by removing the four screws. 3. Remove the cover to the right - Brother International BES-1240BC | Maintenance Schedule - English - Page 9
Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance Greasing Heads continued 5. screws. 8. Manually color change the machine in between needles 4 and 5 on 9 needle machines or between 6 and 7 on 12 needle machines by rotating the - Brother International BES-1240BC | Maintenance Schedule - English - Page 10
continued 9. Remove the 4 hex bolts, 2 on each side of the head. 11. Remove this bolt on the cap eaves guide Do this for all the heads. underneath each head. 10. Cut threads between thread stand and head. Remove head from machine by lifting up on it and unhook the wire clamp and disconnect the - Brother International BES-1240BC | Maintenance Schedule - English - Page 11
15. Remove the presser foot guide plates by assembly from the heads. Let the wiper solenoid removing the 3 screws and unhooking the assembly rest on the pantograph. spring from the rear of the plates. 14. Remove the left arm cover on the heads if the machine has them by removing the 2 screws - Brother International BES-1240BC | Maintenance Schedule - English - Page 12
Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance Greasing Heads continued 17. of the head and inject grease into the hole. Replace screw. 20. Apply black grease to the presser bar spring, end of presser bar guide bracket, presser - Brother International BES-1240BC | Maintenance Schedule - English - Page 13
,1260,1261,1262,1263 For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance Greasing Heads continued 21. Using the white grease, grease the V groove on both 23. Using the - Brother International BES-1240BC | Maintenance Schedule - English - Page 14
.com Website: http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance Greasing Heads continued 25. Reassemble machine in reverse order. After placing the heads on the machine make sure they sit flush with the mounting surface by manually color changing to another needle
5/24/05
1
Perform all maintenance with the machine OFF
Daily Maintenance
Cleaning
Oiling
Rotary hook
1.
Open bobbin case covers and remove bobbin
cases. Use brush to remove lint build up in and
around rotary hooks. Compressed air may also be
used.
2.
Insert bobbin cases in to rotary hooks. Make sure
bobbin thread is not over 2 inches long. Close
bobbin case covers.
Rotary hook
1.
Open the bobbin case covers and rotate the outer
part of the rotary hooks counter-clockwise until you
see what is called the raceway.
(This is the raised
black portion.)
Place a small drop of oil on the
raceways.
2. Close bobbin case covers.
(Rotary hooks will automatically orientate themselves back
to the correct position when the machine is turned back on.)
For Technical Assistance Please Call Toll Free
1-877-4BROTHER
Email:
Website
:
B
B
E
E
S
S
-
-
9
9
4
4
0
0
,
,
9
9
4
4
1
1
,
,
1
1
2
2
4
4
0
0
,
,
1
1
2
2
4
4
1
1
9
9
6
6
0
0
,
,
9
9
6
6
1
1
,
,
9
9
6
6
2
2
,
,
9
9
6
6
3
3
,
,
1
1
2
2
6
6
0
0
,
,
1
1
2
2
6
6
1
1
,
,
1
1
2
2
6
6
2
2
,
,
1
1
2
2
6
6
3
3