Brother International BES-1240BC Maintenance Schedule - English - Page 6

5/24/05

6

Monthly Maintenance

Greasing

Cam grooves continued

9.

Remove presser foot guide plates and unhook

springs located on the back.

10. Using the black grease, grease the work clamp

cam for each head.

11. Hook the spring to the back of the presser foot

guide plate and reinstall the plate leaving the

screws loose.

Make sure that the shaft clamp of the

presser foot goes into the guide on the plate. The

retracting lever should be underneath the shaft

clamp. Before final tightening of the screws, please

check the alignment of the presser foot to the

needle plate and make sure that the presser foot

goes up and down smoothly. Do this for all of the

heads.

12. Manually color change to needle 5 if it is a 9 needle

machine or 6 if it is a 12 needle machine. Reinstall

head covers, right cover on head 1 and left cover on

head 6.

For Technical Assistance Please Call Toll Free

1-877-4BROTHER

Email:

[email protected]

Website

:

http://www.brother-usa.com/industembroidery/tech_down.aspx

B

B

E

E

S

S

-

-

9

9

4

4

0

0

,

,

9

9

4

4

1

1

,

,

1

1

2

2

4

4

0

0

,

,

1

1

2

2

4

4

1

1

9

9

6

6

0

0

,

,

9

9

6

6

1

1

,

,

9

9

6

6

2

2

,

,

9

9

6

6

3

3

,

,

1

1

2

2

6

6

0

0

,

,

1

1

2

2

6

6

1

1

,

,

1

1

2

2

6

6

2

2

,

,

1

1

2

2

6

6

3

3

Brother International BES-1240BC Maintenance Schedule - English - Page 6

needle plate and make sure that the presser foot

Page 6 highlights