Brother International CE4400 Operation Manual - Page 27
Using the needle threader for models, equipped with the needle threader
View all Brother International CE4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Put the thread behind the needle bar thread l guide above the needle. ■ Using the needle threader (for models equipped with the needle threader) The thread can easily be passed behind the needle bar thread guide by holding the thread in your left hand, then feeding the thread with CAUTION your right hand. ● The needle threader can be used with a 75/11 1 through 100/16 home sewing machine needle. However, the needle threader cannot be used with a 65/9 home sewing machine needle. When using special thread such as transparent nylon thread or metallic thread, the needle threader cannot be used. ● Thread with a thickness of 130/120 or thicker cannot be used with the needle threader. ● The needle threader cannot be used with the wing needle or the twin needle. a Needle bar thread guide ● If the needle threader cannot be used, refer to Turn off the sewing machine. m CAUTION "Upper threading" (page 22). Follow steps a through m of the procedure a in "Upper threading" to thread the machine to the needle bar thread guide. ● Make sure you turn the power off while threading the machine without using the needle threader (for models equipped with the needle threader). If you accidentally step on the foot controller and the machine starts to sew, you could be injured. Lower the presser foot lever. b While lowering the needle threader lever, c hook the thread onto the guide. Thread the needle from front to back and pull n out about 5 cm (2 inches) of thread. a 5 cm (2 inches) Note ● If the thread take-up lever is lowered, the upper thread cannot be wrapped around the thread take-up lever. Make sure you raise the presser foot lever and the thread take-up lever before you feed the upper thread. ● If you incorrectly feed the thread you may cause sewing problems. a Needle holder b Needle threader lever c Guide 25