Brother International CE7070PRW Users Manual - English - Page 37
Removing the presser foot, holder
View all Brother International CE7070PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Slowly lower the presser foot lever so that the f presser foot pin snaps into the shank in the presser foot holder. Use the disc-shaped screwdriver to loosen the b presser foot holder screw. 1 a Disc-shaped screwdriver b Presser foot holder c Presser foot holder screw ■ Attaching the presser foot holder Align the presser foot holder with the lowera left side of the presser bar. a Presser foot lever b Presser foot holder c Shank d Pin X The presser foot is attached. Raise the presser foot lever to check that the g presser foot is securely attached. a Presser foot holder b Presser bar Hold the presser foot holder in place with your b right hand, and then tighten the screw using the disc-shaped screwdriver in your left hand. Removing the presser foot holder Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the quilting foot. Use the disc-shaped screwdriver to remove the presser foot holder. Remove the presser foot. a • For details, refer to "Replacing the presser foot" (page 34). a Disc-shaped screwdriver b Presser foot holder c Presser foot holder screw Note ● If the presser foot holder is not correctly installed, the thread tension will be incorrect. CAUTION ● Be sure to securely tighten the presser foot holder screw, otherwise the presser foot holder may fall off and the needle may strike it, causing the needle to bend or break. 35