Brother International CE8100 Operation Manual - Page 48
Using overcasting foot
View all Brother International CE8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
UTILITY STITCHES Using overcasting foot Attach overcasting foot "G". a Select stitch or . b • For details, refer to "Selecting a stitch" (page 37). Position the fabric with the edge of the fabric c against the guide of the presser foot, and then lower the presser foot lever. a Guide Slowly turn the handwheel toward you d (counterclockwise) and check that the needle does not touch the presser foot. Sew with the edge of the fabric against the e presser foot guide. 1 a Needle drop point CAUTION ● After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. a Check that the needle does not touch the presser foot. 46