Brother International CP60X Stitch Chart - Page 1

Stitch Chart Memo • When any of the following stitches (reverse stitch patterns) are selected, pressing Reinforcement stitch button) will sew reverse stitches. (Reverse/ Stitch 60 stitches 00 01 04 No. 50 stitches 00 01 04 40 stitches 00 01 04 When any other stitch is selected, pressing (Reverse/Reinforcement stitch button) will sew reinforcement stitches. • The stitch pattern symbols indicate the following. a bd c de e 1 Left needle position 2 Middle (center) needle position 3 Right needle position 4 Reverse stitch pattern 5 Reinforcement stitch pattern Note • The walking foot can only be used with straight or zigzag stitch patterns. Do not sew reverse stitches with the walking foot. • When using the twin needle, set the machine to the twin needle mode. For details, refer to the Operation Manual. *1 Twin needle can be used by attaching zigzag foot "J". For details on using the twin needle, refer to the Operation Manual. No. Stitch Presser foot Stitch name/Applications Stitch width (mm (inch)) Auto. Manual Stitch length (mm (inch)) Auto. Manual 60 stitches model 50 stitches model 40 stitches model 00*1 00*1 00*1 01*1 01*1 01*1 02*1 02*1 02*1 03*1 03*1 03*1 04*1 04*1 04*1 Straight stitch (Left) J General sewing, gather, pintuck, etc. 0.0 (0) 0.0 - 7.0 (0 - 1/4) 2.5 (3/32) 0.2 - 5.0 (1/64 - 3/16) Straight stitch (Middle) J General sewing, gather, pintuck, etc. 3.5 (1/8) 0.0 - 7.0 (0 - 1/4) 2.5 (3/32) 0.2 - 5.0 (1/64 - 3/16) Triple stretch stitch J General sewing for reinforcement and decorative topstitching 0.0 (0) 0.0 - 7.0 (0 - 1/4) 2.5 (3/32) 1.5 - 4.0 (1/16 - 3/16) Stem stitch J Reinforced stitching, sewing and decorative applications 1.0 (1/16) 1.0 - 3.0 (1/16 - 1/8) 2.5 (3/32) 1.0 - 4.0 (1/16 - 3/16) Zigzag stitch J For overcasting, mending. 3.5 (1/8) 0.0 - 7.0 (0 - 1/4) 1.4 (1/16) 0.0 - 4.0 (0 - 3/16) 1