Brother International CS-6000B Owner's Manual - English - Page 61
The upper, thread breaks., The lower, thread is tangled, or breaks., The thread ten, sion is
View all Brother International CS-6000B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
NCBC2000.book Page 60 Thursday, October 21, 2004 4:32 PM APPENDIX Symptom Possible cause How to put it right You have not inserted the needle properly. Insert the needle properly. The area around the hole in the needle plate is scratched. Replace the needle plate. Contact your retailer or the nearest authorised service center. The upper thread breaks. The area around the hole in the presser foot is scratched. Replace the presser foot. Contact your retailer or the nearest authorised service center. The bobbin case is scratched, or has a burr on it. Replace the bobbin case. Contact your retailer or the nearest authorised service center. You have not used a bobbin that has been designed for this machine. Incorrect bobbins will not work properly. Only use a bobbin that has been designed for this machine. You have not wound the bobbin thread properly. Wind the bobbin thread properly. The lower thread is tangled or breaks. The bobbin is scratched or does not turn smoothly. The thread is tangled. You have not used a bobbin that has been designed for this machine. Replace the bobbin. Remove the tangled thread and clean the bobbin case. Incorrect bobbins will not work properly. Only use a bobbin that has been designed for this machine. Bobbin is set incorrectly. Reset the bobbin thread correctly. You have not threaded the upper thread properly. Correct the upper threading. You have not wound the bobbin thread properly. Wind the bobbin thread properly. The thread tension is incorrect. You have not threaded the right combination of thread and needle for the fabric you are using. You have not attached the presserfoot holder properly. Choose a thread and needle that are appropriate for the type of fabric. Attach the presser-foot holder properly. The thread tension is incorrect. Adjust the tension of the upper thread. You have not used a bobbin that has been designed for this machine. Incorrect bobbins will not work properly. Only use a bobbin that has been designed for this machine. Bobbin is set incorrectly. Reset the bobbin thread correctly. You have not threaded the upper thread properly or fitted the bobbin properly. Thread the upper thread and wind the bobbin thread properly. You have not fitted the spool properly. Fit the spool properly. The fabric is wrinkled. You have not used the right combination of fabric, thread and needle. Choose a thread and needle that are appropriate for the type of fabric. The needle is bent or blunt. Replace the needle. If you are sewing thin fabric, the stitch is too thick. Sew with stabiliser material under the fabric. The thread tension is incorrect. Adjust the tension of the upper thread. Reference page 21 - - - page 11 page 11 - page 57 page 11 page 14, 15 page 16 page 11 page 20 page 25 page 29 page 11 page 14, 15 page 14, 15, 16 - page 20 page 21 page 31 page 29 60