Brother International DA-9280 Instruction Manual - English - Page 9
Ground wire connections
View all Brother International DA-9280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. INSTALLATION u y 3. Place the machine head on the table, adjust its posi- tion in forward and backward directions by aligning it !0 with the hole for presser bar lifter chain y, and in side- wise directions by aligning it with belt hole !0. u i u o 4. After fastening cushions u to the machine bed and pulley cover base with set screws i, fix them to the table with screws o. * Place the work table so that the machine head is horizontal. If the machine head is not horizontal, lubrication will not be carried out correctly. !1 y !2 5. Connect the presser bar lifter chain y to the knee lifter lever !1 and the presser lifter pedal !.2 5-2. Ground wire connections r q e w To motor 4 Connect the ground wire to the sewing machine head and motor. (Use the correct type of ground wire and washer.) 1. Remove lower thread guide holder screw w. 2. Secure the ground wire q to the sewing machine head with screw w and washer e. (The attachment location is indicated by a ground symbol r.) 3. Pass the ground wire q through the hole in the table. 4. Connect the ground wire q to the motor in accordance with the instructions in the instruction manual for the motor. DA-9280