Brother International DCP 165C Users Manual - English - Page 89
Packing and shipping the machine
UPC - 012502620440
View all Brother International DCP 165C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Troubleshooting and Routine Maintenance Packing and shipping the machine B When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine properly, you could void your warranty. CAUTION It is important to allow the machine to 'park' the print head after a print job. Listen carefully to the machine before unplugging it to make sure that all mechanical noise has stopped. Not allowing the machine to finish this parking process may lead to print problems and possible damage to the print head. a Open the ink cartridge cover. b Press the lock release lever to release the ink cartridge and take out all the ink cartridges. (See Replacing the ink cartridges on page 69.) c Install the green protective part and then close the ink cartridge cover. CAUTION Make sure that the plastic tabs on both sides of the green protective part (1) have securely clicked into place (2). 1 2 If you are not able to find the green protective parts, DO NOT remove the ink cartridges before shipping. It is essential that the machine be shipped with either the green protective parts or the ink cartridges in position. Shipping without them will cause damage to your machine and may B void your warranty. d Unplug the machine from the AC power outlet. e Using both hands, use the plastic tabs on both sides of the machine to lift the scanner cover until it locks securely into the open position. Then unplug the interface cable from the machine, if it is connected. 77