Brother International DCP-7065DN Quick Setup Guide - English - Page 14
Macintosh, Wired Network - brothers
UPC - 012502627128
View all Brother International DCP-7065DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Wired Network Macintosh For Wired Network Interface Users (DCP-7065DN only) (Mac OS X 10.4.11 - 10.6.x) 8 Before you install a Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. IMPORTANT For Mac OS X 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x. (For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/.) b Remove the protective cap from the LAN connector marked with a symbol. 9 Install MFL-Pro Suite a Put the installation CD-ROM into your CD-ROM drive. b Double-click the Start Here OSX icon. Follow the on-screen instructions. Note It may take a few minutes for installation to complete. c Follow the on-screen instructions until this screen appears. Choose your machine from the list, and then click OK. c Connect the network interface cable to the LAN connector and then connect it to a free port on your hub. d Make sure your machine's power switch is on. Note If your machine is not found over the network, confirm your network settings. 14