Brother International DCP-8060 Software Users Manual - English - Page 175
Scan to OCR, 2sided Ledge, 1sided, to choose the destination Macintosh
UPC - 012502615064
View all Brother International DCP-8060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
10. Network Scanning (Not available for DCP-8060) Scan to OCR 10 When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh® you designated on your network. ControlCenter2 will activate the OCR software installed on your Macintosh® (Presto!® PageManager®) and convert your document into text for viewing and editing from a word processing application on the designated Macintosh®. You can change the Scan configuration. (See OCR (word processing application) on page 151.) a Put the document face up in the ADF, or face down on the scanner glass. b Press (Scan). c Press a or b to choose Scan to OCR. Press OK. If your machine is a MFC-8460N or MFC-8660DN, go to Step e. If your machine is a MFC-8860DN, MFC-8870DW or DCP-8065DN, go to Step d. d Press a or b to choose 2sided (L)edge, 2sided (S)edge or 1sided. Press OK. Note If you want to scan a document using the duplex scanning feature, you need to put the document in the ADF and then choose 2sided (L) edge or 2sided (S) edge depending on your document layout. e Press a or b to choose the destination Macintosh® you want to send to. Press OK. If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh® on the control panel. Press OK. The machine will start the scanning process. Note Presto!® PageManager® or a 3rd Party OCR Software must be installed on your Macintosh®. 169