Brother International DCP-L5600DN Quick Setup Guide - Page 1

DCP‑L5500DN / DCP‑L5600DN / DCP‑L5650DN / MFC‑L5700DW / MFC‑L5800DW / MFC‑L5850DW / MFC‑L5900DW / MFC‑L6700DW / MFC‑L6800DW Quick Setup Guide Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure. Not all models are available in all countries. The latest manuals are available at the Brother Solutions Center: solutions.brother.com/manuals. D01GT2001-00 USA/CAN Version C Unpack the machine and check the components Watch our Video FAQs for help with setting up your Brother machine: solutions.brother.com/videos. Drum Unit and Toner Cartridge Assembly (pre‑installed) AC Power Cord Telephone Line Cord (For MFC models) Quick Setup Guide Product Safety Guide Basic User's Guide (only for certain models) Installation CD‑ROM NOTE: • Manuals in Spanish for this model are available on the Brother Solutions Center. (USA only): solutions.brother.com/manuals Los manuales en español de este modelo están disponibles en el Brother Solutions Center. (Solamente en los Estados Unidos): solutions.brother.com/manuals • The available connection interfaces vary depending on the model. • You must purchase the correct interface cable for the interface you want to use. USB cable We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long. Network cable Use a straight-through Category 5 (or greater) twisted-pair cable. • The illustrations in this Quick Setup Guide show the MFC‑L6800DW. 1 Remove the packing materials and install the drum unit and toner cartridge assembly Discard the silica gel pack. 2 Load paper in the paper tray Adjust the paper guides. Remove the orange part. 3 Connect the power cord and turn on the machine 4 Connect the telephone line cord (for MFC models only) If you do not plan to use the fax feature on this machine, go to step . Back 5 Select your language (if needed) 1. On the machine's Touchscreen, press [Settings] > [All Settings] > [Initial Setup] > [Local Language]. 2. Press your language. 3. Press . Front 6 Configure the machine for faxing (for MFC models only) If you do not plan to use the fax feature on this machine, go to step . A. Set the date and time Press [Settings] > [All Settings] > [Initial Setup] > [Date & Time]. Date 1. Press [Date]. 2. Enter the last two digits for the year using the Touchscreen, and then press [OK]. 3. Enter the two digits for the month using the Touchscreen, and then press [OK]. 4. Enter the two digits for the day using the Touchscreen, and then press [OK]. Clock Type 1. Press [Clock Type]. 2. Press [12h Clock] or [24h Clock]. Time 1. Press [Time]. 2. Enter the time using the Touchscreen. „„ 12h Clock only Press [AM/PM] to select [AM] or [PM]. 3. Press [OK]. 4. Press . B. Set the Station ID Press [Settings] > [All Settings] > [Initial Setup] > [Station ID]. Fax number 1. Press [Fax]. 2. Enter your fax number (up to 20 digits) using the Touchscreen, and then press [OK]. Telephone number 1. Press [Tel]. 2. Enter your telephone number (up to 20 digits) using the Touchscreen, and then press [OK]. Name 1. Press [Name]. 2. Enter your name (up to 20 characters) using the Touchscreen, and then press [OK]. 3. Press .