Brother International DreamWeaver„ XE Innov-is VM6200D Users Manual - En
Brother International DreamWeaver„ XE Innov-is VM6200D Manual
View all Brother International DreamWeaver„ XE Innov-is VM6200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International DreamWeaver„ XE Innov-is VM6200D manual content summary:
- Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 1
Operation Manual Embroidery and Sewing Machine Product Code: 882-C40/C42 Be sure to read this document before using the machine. We recommend that you keep this document nearby for future reference. - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 2
damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused . Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 3
Please read these safety instructions before attempting to use the machine. DANGER - To reduce the risk of electrical shock 1 Always unplug the machine from the electrical outlet immediately after using, when cleaning, making any user servicing adjustments mentioned in this manual, or if you are - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 4
when sewing, and follow careful instruction when free motion stitching so outdoors. 8 For a longer service life: • When storing troubleshooting table in the back of the operation manual to inspect and adjust the machine yourself. If the problem persists, please consult your local authorized Brother - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 5
above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 6
) 704-1700 declares that the product Product Name: Model Number: Brother Sewing Machine VM6200D This device complies with Part 15 of the FCC Rules. Operation and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 7
INSTRUCTIONS Laser Notices (For U.S.A. only) Laser Safety This sewing machine is certified as a Class 1 laser product under the U.S. Department of Health and Human Services marketed in the United States. Brother Industries, Ltd. 15-1, Naeshiro- manual may result in hazardous radiation exposure. B-5 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 8
IMPORTANT SAFETY INSTRUCTIONS Laser Notices (For countries except U.S.A.) IEC 60825-1 Specification This sewing machine is a Class 1 laser product • Use of controls, adjustments or the performance of procedures other than those specified in this manual may result in hazardous radiation exposure. B-6 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 9
OUTSTANDING FEATURES OUTSTANDING FEATURES Setting Laser Guideline Marker as a Guide to Sew Sensor Function - Automatic Pattern Placement The guideline marker shows the sewing position. You can adjust the sewing position by moving the guideline marker - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 10
decorative stitches Page S-96 E Embroidering This section provides instruction to embroider designs with this machine. Chapter 1, "Embroidery how to create bobbin work Page A-2 Chapter 2 Maintenance and Troubleshooting Find troubleshooting tips and pointers as well as how to keep your machine - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 11
CONTENTS CONTENTS TRADEMARKS INTRODUCTION 1 IMPORTANT SAFETY INSTRUCTIONS 1 OUTSTANDING FEATURES 7 WHAT YOU CAN DO 28 Using the Sewing Machine Help Key 36 Using the Operation Guide Function 37 Using the Sewing Guide Function 38 Using the Pattern Explanation Function 39 LOWER THREADING 40 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 12
Embroidery Patterns 53 Chapter2 Embroidery Edit 56 EXPLANATION OF FUNCTIONS 57 SELECTING PATTERNS TO EDIT 58 Selecting Embroidery Patterns/Brother "Exclusives"/Floral Alphabet Patterns/Frame/Bobbin Work Patterns 59 Selecting Alphabet Character Patterns 59 EDITING PATTERNS 61 Moving the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 13
Maintenance Message 21 ADJUSTING THE SCREEN 22 Adjusting the Brightness of the Screen Display 22 Touch Panel is Malfunctioning 22 TROUBLESHOOTING 23 Frequent troubleshooting topics 23 Upper thread tightened up 23 Tangled thread on wrong side of fabric 24 Incorrect thread tension 26 Fabric - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 14
bobbin. b Pre-tension disk Pass the thread around the pre-tension disk when winding the bobbin thread. (page B-40) c Thread guide for bobbin winding Pass the thread through this thread guide when winding the bobbin thread. (page B-40) d Spool pin Place a spool of thread on the spool pin. (page B-48 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 15
to clean the race. (page S-26, E-22) h Needle plate The needle plate is marked with guides to help sew straight seams. (page S-26) i Needle bar thread guide Pass the upper thread through the needle bar thread guide. (page B-48) j Needle clamp screw Use the needle clamp screw to hold the needle in - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 16
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Embroidery Unit Operation Buttons a Carriage The carriage moves the embroidery frame automatically when embroidering. (page B-64) b Release button (located under the embroidery unit) Press the release button to remove the embroidery unit. (page B-64) c - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 17
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Using the Flat Bed Attachment Pull the top of the flat bed attachment to open the accessory compartment. A presser foot storage tray is stored in the accessory compartment of the flat bed attachment. a Storage space of the flat bed attachment b Presser foot - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 18
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Included Accessories 1 2 3 4 5 6 7 8* 9 10 11 12 13 14 15 16 17 18 19 20 21 75/11 2 needles 90/14 2 needles 90/14 2 needles: Ball point needle (gold colored) 2.0/11 needle 75/11 2 needles 22 23 24 25 26 27 28 29 30 31 32 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 19
Stabilizer material 50 Grid sheet set 51 Chalk pencil 52 Sensor pen 53 Pen holder 54 Dust cover* 55 Accessory bag 56 Operation manual 57 Quick Reference Guide 58 MY CUSTOM STITCH CD* Part Code Americas Others SA438 EF74: XC8480-152 SA439 EF75: XC8481-152 SA440 EF76: XC8482-152 SA-EBT - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 20
The following are available as optional accessories to be purchased separately from your authorized Brother dealer. 1 2 3 4 5 6 7 8 9 10 11 12 : XE0806-001 Water soluble stabilizer SA520 BM5: XE0615-001 11 Seam guide SA538 SG1: XC8483-052 12 Walking foot SA140 F033N: XC2214-052 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 21
Basic operations This section provides details on the initial setup procedures as well as descriptions of this machine's more useful functions. Page number starts with "B" in this section. Chapter1 Getting Ready B-20 Chapter2 Sensor Functions B-70 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 22
the Machine Setting Mode Key 28 ■ Selecting the "Eco Mode" or "Shutoff Support Mode 32 ■ Changing the Pointer Shape When a USB Mouse Is Used ........ Sewing Machine Help Key 36 Using the Operation Guide Function 37 Using the Sewing Guide Function 38 Using the Pattern Explanation Function 39 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 23
unattended, either the main switch of the machine should be turned to OFF or the plug must be removed from the socket-outlet. • When servicing the machine or when removing covers, the machine must be unplugged. • For U.S.A. only This appliance has a polarized plug (one blade wider than the other - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 24
TURNING THE MACHINE ON/OFF a Insert the power supply cord into the power cord receptacle, then insert the plug into a wall outlet. d Turn the main power off the machine. switch to "O" to turn Memo • If the machine is turned off in the middle of sewing in the "Sewing" function, the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 25
d Press or to set time/date. a b c d a Press to display the time on the screen. b Set the year (YYYY), month (MM) and date (DD). c Select whether 24h or 12h setting to display. d Set the current time. e Press to start using your machine. → The clock starts from 0 second of the time you set. - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 26
LCD SCREEN LCD SCREEN CAUTION • Only touch the screen with your finger or the included touch pen. Do not use a sharp pencil, screwdriver, or other hard or sharp object. It is not necessary to press hard on the screen. Pressing too hard or using a sharp object may damage the screen. ■ Home Page - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 27
LCD SCREEN ■ Utility Stitch Screen Press a key with your finger to select the stitch pattern, to select a machine function, or to select an B operation indicated on the key. When the key display is light gray, the function is not currently available. a b 1 g c d h e f Getting Ready No. - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 28
LCD SCREEN ■ Key Functions a b cd u t e s r q f g h p i o j k nm l No. Display Key Name Explanation Page a "Utility Stitch" key Press this key to select a straight stitch, zigzag stitch, buttonhole, blind hem S-21 stitch, or other stitches commonly used in garment construction - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 29
LCD SCREEN No. Display Key Name Explanation Page o Stitch width and Shows the zigzag width and stitch length settings of the currently selected S-10 stitch length key stitch pattern. You can use the plus and minus keys to adjust the zigzag width and stitch length settings. p Guideline - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 30
LCD SCREEN Using the Machine Setting Mode Key Press to change the default machine settings (needle stop position, embroidery speed, opening display, etc.). To display the different settings screens, press for "Sewing settings", for "General settings" or for "Embroidery settings". Memo • - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 31
. Increase the number for louder volume, decrease for softer volume. f Select to save the machine power by setting the "Eco Mode" or the "Shutoff Support Mode" (see page B-32). g Select the initial screen that is displayed when the machine is turned on (see page B-32). h Change the display language - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 32
function (see page B-74). d Display the service count which is a reminder to take your machine in for regular servicing. (Contact your authorized dealer for details.) e . Check with your local authorized Brother dealer or at " http://solutions.brother.com " for available updates (see page A-38). B-30 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 33
Embroidery settings a b c d e f LCD SCREEN B g 1 k h l m i Getting Ready j a Select from among 16 embroidery frame displays (see page E-35). b Change the thread color display on the "Embroidery" screen; thread number, color name (see page E-34). c When the thread number "#123" is selected - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 34
Touch the screen or any operational button to continue sewing. "Shutoff Support Mode"; Machine will turn off after set period of time. Turn machine the machine while the machine is in the "Eco Mode" or the "Shutoff Support Mode", wait for about 5 seconds before turning on the machine again. ■ - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 35
LCD SCREEN d Use initial or screen to select display. the setting for the ■ Changing the Background Colors of the Embroidery Patterns B In the settings screen, the background colors can be changed for the embroidery pattern and pattern thumbnails. Depending on the pattern color, select - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 36
LCD SCREEN e Select the background settings available. color from the 66 a ■ Specifying the Size of Pattern Thumbnails The thumbnails for selecting an embroidery pattern can be set to be displayed at the smaller size or a larger size. The larger size is 1.5 times the smaller size. b a - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 37
d Press or thumbnail size. to select the desired LCD SCREEN ■ Saving a Settings Screen Image to USB Media An image of the settings screen can be saved as a B BMP file. A maximum of 100 images can be saved on a single USB media at one time. 1 a Insert the USB media into the the right side - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 38
LCD SCREEN Using the Sewing Machine Help Key Press to open the sewing machine help screen. Three functions are available from the screen shown below. a b c a Press this key to see explanation for upper threading, winding the bobbin, changing the presser foot, preparing to embroider a pattern, - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 39
LCD SCREEN Using the Operation Guide Function B Press to open the screen shown below. Six categories are attaching the embroidery unit, preparing fabric for embroidering, etc. information. displays troubleshooting displays information about cleaning the machine, etc. Basic operations B-37 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 40
will change. d Press (upper threading). Using the Sewing Guide Function The sewing guide function can be used to select patterns from the Utility screen shows instructions for threading the machine. e Read the instructions. * Press to see a video of the displayed instructions. Press under - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 41
LCD SCREEN e Read the explanations appropriate stitch. and select the c Press . → The screen displays directions for sewing the selected stitch. Follow the directions to sew the stitch. * Press to view the next page. B 1 * Press to view the previous page. Getting Ready Using the Pattern - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 42
LOWER THREADING LOWER THREADING Winding the Bobbin Press → → → → in this order to display a video example of bobbin winding on the LCD (see page B-39). Follow the steps explained below to complete the operation. ■ Using the Supplemental Spool Pin With this machine, you can wind the bobbin - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 43
near the thread spool. With your left hand, hold the end of the thread, and use both hands to pass the thread through the thread guide. a Thread guide Basic operations B-41 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 44
the pre-tension disk. h Pass the end of the thread through the guide slit in the bobbin winder seat, and pull the thread to the right pre-tension disks. g Wind the thread clockwise bobbin 5-6 Times. around the a Guide slit (with built-in cutter) b Bobbin winder seat CAUTION • Be sure to - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 45
LOWER THREADING j Press . → Bobbin winding starts automatically. The bobbin stops rotating when bobbin winding is completed. The bobbin winding switch will automatically return to its original position. k Cut the thread bobbin. with scissors and remove the B 1 Getting Ready Note • - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 46
and set the bobbin on the shaft. f Pass the thread through the thread guide. a Groove in the bobbin b Spring on the shaft c Pivot the spool pin so that the thread unwinds from the front of the spool. a Thread guide g Pass the thread around the pre-tension disk making sure that the thread is - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 47
a If the thread becomes tangled under the bobbin winder seat, press once to stop the bobbin winding. b Cut the thread with pre-tension disk. scissors near the LOWER THREADING Setting the Bobbin B Press → → 1 → → in this order to display a video example of the operation on the LCD ( - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 48
right. e While lightly holding down bobbin with your right hand as shown, guide the thread through the slit (a and b). * At this time, check firmly around the tab with your left hand as shown, lightly pull the thread to guide it through the slit. a Slit b Cutter (Cut the thread with the cutter - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 49
free motion quilting or embroidery. Memo • You can pull up the bobbin thread after threading the upper thread ("UPPER THREADING" on page B-48). a Guide the bobbin groove, following thread through the the arrow in the illustration. * Do not cut the thread with the cutter. * Do not replace the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 50
UPPER THREADING UPPER THREADING Upper Threading Press → → → → in this order to display a video example of the operation on the LCD (see page B-39). Follow the steps explained below to complete the operation. a Turn the main power to ON. b Press the "Presser Foot raise the presser foot. - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 51
break. a Spool cap (special) b 12 mm (1/2 inch) c 75 mm (3 inches) f While holding the pull the thread up thread with both hands, from under the thread guide plate. a Thread guide plate g While holding hand, pass the the thread in your right thread through the thread - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 52
in the upper groove area to check if the thread catches on the take-up lever visible inside the upper groove area. a Groove in thread guide l Pull the thread up through the thread cutter to cut the thread, as shown in the illustration. a Look in the upper groove area i Pass the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 53
threaded with the needle threader. In this case, instead of B using the needle threader after passing the thread through the needle bar thread guide (marked "6"), manually pass the thread 1 through the eye of the needle from the front to the back. Getting Ready → The thread passes through the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 54
-tension disks. c Pass the thread through the needle bar thread guides on the needle bar, then thread the needle on the left side manually. a Needle bar thread guide Note • The "Automatic Threading" button cannot be used. Manually thread the twin needle from front to back. Using the "Automatic - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 55
. Thread the needle on the right side. B 1 Getting Ready a Needle bar thread guide i Press . j Select a stitch pattern. (Example: ) * Refer to the " the spool before using it. When using specialty threads, threading must be done manually. If the spool net is too long, fold it once to match it - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 56
UPPER THREADING ■ Using the Vertical Spool Pin Use the vertical spool pin when using an irregularly shaped thread spool, and when sewing or embroidering with metallic thread. a Insert the vertical winder shaft. spool pin onto the bobbin a Bobbin winder shaft d b Vertical spool pin c c - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 57
CHANGING THE PRESSER FOOT CHANGING THE PRESSER FOOT B CAUTION 1 • Always press on the screen before changing the presser foot. If is not pressed and the "Start/Stop" button or another button is pressed, the machine will start and may cause injury. • Always use the correct presser foot for - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 58
CHANGING THE PRESSER FOOT ■ Attaching the Walking foot The walking foot holds the fabric between the presser foot and the feed dogs to feed the fabric. This enables you to have better fabric control when sewing difficult fabrics (such as quilted fabrics or velvet) or fabrics that slip easily (such - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 59
CHANGING THE NEEDLE CHANGING THE NEEDLE CAUTION • Always press on the screen before changing the needle. If is not pressed and the Start/Stop button or another operation button is pressed accidentally, the machine will start and injury may result. • Use only sewing machine needles made for - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 60
is probably the most important part of the sewing machine. Choosing the proper needle for your sewing project will result in a beautiful finish and fewer problems. Below are some things to keep in mind about needles. • The smaller the needle number, the finer the needle. As the numbers increase, the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 61
ABOUT THE NEEDLE AND FABRIC Fabric/Thread/Needle Combinations The following table provides information concerning the appropriate thread and needle for various fabrics. Please refer to this table when selecting a thread and needle for the fabric you wish to use. Fabric type/Application Thread - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 62
BEFORE EMBROIDERING BEFORE EMBROIDERING Embroidery Step by Step Follow the steps below to prepare the machine for embroidery. Step 9 Step 3 Step 6, 8 Step 1, 2 Step 4 Step 7 Step 5 Step # 1 2 3 4 5 Aim Presser foot attachment Checking the needle Embroidery unit attachment Bobbin thread setup - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 63
BEFORE EMBROIDERING Using the Embroidery Foot "W+" d Push the black button on the presser holder and remove the presser foot. foot with LED Pointer B By plugging in the connector on the back of your machine, the embroidering needle drop point will 1 be indicated on the fabric, allowing you - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 64
to the previous page. Note • With thick elastic fabric, the position will be misaligned only at raised parts in the fabric. In this case, manually adjust the position according to the thickness of the fabric. • With fabric that has a very uneven surface such as quilting, the position is not - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 65
BEFORE EMBROIDERING ■ Adjusting the LED Pointer d Press . Adjust the LED pointer if it indicates a point different → The Embroidery Foot "W+" with LED Pointer than the actual needle drop point. Adjustment screen appears. B Before adjusting the LED pointer, mark the actual needle drop point - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 66
BEFORE EMBROIDERING Attaching the Embroidery Unit ■ About the Embroidery Unit CAUTION • Do not move the machine with the embroidery unit attached. The embroidery unit could fall off and cause injury. • Keep your hands and foreign objects away from the embroidery carriage and frame when the machine - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 67
■ Removing the Embroidery Unit a Press either or , then press . → The carriage will move to the removal position. CAUTION • Always remove the embroidery frame before pressing . Otherwise, the frame may strike the embroidery foot, and possibly cause injury. • The embroidery unit will not - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 68
force. Check the orientation of the connector. • For details on the position of the USB port on the computer (or USB hub), refer to the instruction manual for the corresponding equipment. B-66 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 69
USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE Using a USB Mouse The USB mouse, connected to the sewing machine, can be used to perform a variety of operations in the screens. ■ Changing Pages If page numbers and a vertical scroll bar for additional pages are displayed, click the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 70
USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE ■ Attaching the Dual Feed Foot a Follow the steps from a to e of "Using the Embroidery Foot "W+" with LED Pointer" on page B-61. b Position foot bar the dual feed foot to the presser by aligning the notch of the dual feed foot to the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 71
USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE When the feed position lever is down, the black roller belt on the dual feed is engaged. d Use feeding or of the to increase top fabric. or decrease the * Select "00" for sewing in most cases. * If the feed amount for the top fabric - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 72
BBasic operations 2 Chapter Sensor Functions CONVENIENT SEWING FEATURES BY USING THE SENSOR PEN 71 CONNECTING THE SENSOR PEN 71 Using the Sensor Pen Holder 72 USING THE SENSOR PEN 73 Using the Sensor Pen 73 Important Information about Sensor Pen 73 Calibrating the Sensor Pen 74 USING SENSOR - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 73
CONVENIENT SEWING FEATURES BY USING THE SENSOR PEN CONVENIENT SEWING FEATURES BY USING THE SENSOR PEN By using the sensor pen, you have the option of B 2 four separate functions Sensor Functions • Setting the guideline as a reference for your sewing position. • Set the needle position of - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 74
CONNECTING THE SENSOR PEN Using the Sensor Pen Holder When connecting the sensor pen to the machine, attach the sensor pen holder to keep the sensor pen with the machine. The right side of the holder can be used to hold the touch pen. c Set the sensor pen in the sensor pen holder with the pen tip - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 75
correctly read. • Do not drag the sensor pen tip on the machine, otherwise the sensor pen tip may be chipped off. • If there is any problem with the guideline marker, the sensor function may not operate correctly. Memo • The sensor pen can be used to touch on the screen as a touch - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 76
USING THE SENSOR PEN Calibrating the Sensor Pen e Touch the first point of using the sensor pen. green dot marking Before using the sensor pen for the first time be sure to calibrate it to the screen. Doing so allows the machine to learn the position you usually hold a pen. Hold the sensor - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 77
f Touch the second point of center cross-hair using the sensor pen. of * Touch on the point in the illustrations. USING THE SENSOR PEN B 2 Sensor Functions a Flat bed attachment b Embroidery unit g Press repeat the to finish the calibration. To calibration touch the first point again - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 78
USING SENSOR FUNCTIONS WITH SEWING STITCH USING SENSOR FUNCTIONS WITH SEWING STITCH Before using the sensor functions, carefully read "Utility Stitches" chapter to familiarize yourself with the machine operations. The sensor functions are performed using the sensor pen. Sensor Function Area When - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 79
USING SENSOR FUNCTIONS WITH SEWING STITCH d Press . → The guideline marker position setting screen appears and the guideline marker flashes. e With the sensor pen, touch the location be specified as the guideline marker to position. Memo • The position can be precisely adjusted by touching - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 80
USING SENSOR FUNCTIONS WITH SEWING STITCH Specifying the Needle Drop Position With the Sensor Pen a Turn on the machine. b Press . f With the sensor pen, touch the be specified as the needle drop location to position. → The guideline marker moves to the touched position and flashes. → The - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 81
USING SENSOR FUNCTIONS WITH SEWING STITCH g Press setting. to apply the reference position d Press . * The setting can also be applied by long touching an adjustment area with the sensor pen. → The needle moves to the specified position to start sewing. → The stitch selection screen appears - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 82
USING SENSOR FUNCTIONS WITH SEWING STITCH Note • The following error message appears if the area outside of the sensor pen touch range is touched. Press , and then touch within the sensor pen touch range. i Press stitching to apply width. the second point of the * The setting can also be - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 83
USING SENSOR FUNCTIONS WITH SEWING STITCH Using the Sensor Pen to Specify the Sewing End Point Before start sewing, test the pattern first from steps a to f to see if the stitch can be used with this function. a Turn on the machine. g With the sensor pen, touch the location be specified as the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 84
USING SENSOR FUNCTIONS WITH SEWING STITCH Note • The displayed distance is not the length of a straight line connecting the current needle position and the location touched with the sensor pen. It is the length of a perpendicular intersection for the location touched with the sensor pen and the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 85
USING SENSOR FUNCTIONS IN "EMBROIDERY"/"EMBROIDERY EDIT" MODE USING SENSOR FUNCTIONS IN "EMBROIDERY"/"EMBROIDERY EDIT" MODE Before using the sensor functions, carefully read the procedure in "Embroidery" and "Embroidery Edit" to B 2 familiarize yourself with the machine operations. Specifying - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 86
USING SENSOR FUNCTIONS IN "EMBROIDERY"/"EMBROIDERY EDIT" MODE h Press . c With the sensor pen, touch the point on the fabric corresponding to corner a in the screen. → The embroidering position selection screen appears. i Select the method for embroidery pattern. positioning the * To - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 87
USING SENSOR FUNCTIONS IN "EMBROIDERY"/"EMBROIDERY EDIT" MODE ■ Selecting the Embroidering Position f Press to move the LED pointer by the Pattern Center B on the fabric for adjusting the first position. a Press in the following screen. 2 Sensor Functions g Press to apply the setting. h - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 88
USING SENSOR FUNCTIONS IN "EMBROIDERY"/"EMBROIDERY EDIT" MODE d Press to move the LED pointer on the fabric for adjusting the first position. e Press to apply the setting. f Press to move the LED pointer on the fabric for adjusting the second position. g Press to apply the setting. h The - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 89
Sewing This section describes procedures for using the various utility stitches as well as other functions. It provides details on basic sewing in addition to the more expressive features of the machine, from sewing tubular pieces and buttonholes to sewing the character and decorative stitch - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 90
S Sewing 1 Chapter Sewing Basics SEWING 3 Sewing a Stitch 3 ■ Using the Foot Controller 4 Sewing Reinforcement Stitches 5 Automatic Reinforcement Stitching 5 Sewing Curves 7 Changing Sewing Direction 7 ■ Sewing a Seam Allowance of 0.5 cm or Less 7 Sewing Heavyweight Fabrics 7 ■ If the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 91
SEWING SEWING S CAUTION 1 • To avoid injury, pay special attention to the needle while the machine is in operation. Keep your hands away from moving parts while the machine is in operation. Sewing Basics • Do not stretch or pull the fabric during sewing. Doing so may lead to injury. • Do not - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 92
SEWING g Press the sewing. "Start/Stop" button to start * Guide the fabric lightly by hand. Note • When cutting thread thicker than #30, nylon monofilament thread, or other decorative threads, use the thread cutter on the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 93
a Insert the foot controller on the machine. plug into its jack SEWING If the automatic reinforcement stitch is selected on the screen, reverse stitches (or reinforcement stitches) will be sewn automatically at the beginning of sewing when the "Start/Stop" button S is pressed. Press the " - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 94
SEWING b Press to set the automatic reinforcement stitching function. d Press the "Reverse Stitch" button "Reinforcement Stitch" button. or → The key will display as . Memo • Some stitches, such as buttonholes and bar tacks, require reinforcement stitches at the beginning of sewing. If you - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 95
Curves Sew slowly while keeping the seam parallel with the fabric edge as you guide the fabric around the curve. a 5 mm (approx. 3/16 inch) If the thickness of a seam causes sewing to occur at an angle, help guide the fabric by hand and sew on the downward slope. Changing Sewing Direction Stop - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 96
button to lower the presser foot. c Release the black button. → The presser foot remains level, enabling the fabric to be fed. Memo • Once the trouble spot has been passed, the foot will return to its normal position. • When "Automatic Fabric Sensor System" (Automatic Presser Foot Pressure) in the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 97
Sewing Lightweight Fabrics Place thin paper or tear away embroidery stabilizer under thin fabrics to make sewing easier. Gently tear off the paper or the stabilizer after sewing. a Thin paper Sewing Stretch Fabrics First, baste together the pieces of fabric, and then sew without stretching the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 98
STITCH SETTINGS STITCH SETTINGS When you select a stitch, your machine automatically selects the appropriate stitch width, stitch length, "L/R SHIFT", and upper thread tension. However, if needed, you can change any of the individual settings. Note • Settings for some stitches cannot be changed ( - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 99
Example: Press to shorten the stitch length. → The value in the display gets smaller. Press to lengthen the stitch length. STITCH SETTINGS Setting the "L/R SHIFT" S Follow the steps below when you want to change the placement of the zigzag stitch pattern by moving it left and right. 1 Sewing - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 100
STITCH SETTINGS Setting the Thread Tension You may need to change the thread tension, depending on the fabric and thread being used. Follow the steps below to make any necessary changes. ■ Proper Thread Tension The upper thread and the bobbin thread should cross near the center of the fabric. Only - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 101
USEFUL FUNCTIONS USEFUL FUNCTIONS Automatic Thread Cutting After selecting a stitch pattern, turn on the automatic thread cutting function before sewing, and the machine will automatically sew reinforcement stitches (or reverse stitches, depending on the stitch pattern) at the beginning and end of - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 102
USEFUL FUNCTIONS Adjusting the Needle Drop Position with the Guideline Marker (For models equipped with the guideline marker) The red guideline marker indicates the sewing position on the fabric. You can adjust the sewing position by moving the guideline marker while checking the guideline marker - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 103
USEFUL FUNCTIONS b Use or to adjust the brightness of the guideline marker. → Set the brightness of the guideline marker from "1" for a dim marker, to "5" for the brightest marker, on the fabric. b Use your knee to move the knee lifter bar to the right in order to raise the presser foot. Release - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 104
USEFUL FUNCTIONS Memo • When the pivot setting is selected, the height of the presser foot when sewing is stopped can be changed according to the type of fabric being sewn. Press to display "Pivoting Height" in the settings screen. Press or to select one of the three heights (3.2 mm, 5.0 mm or - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 105
USEFUL FUNCTIONS d Press the "Start/Stop" button to stop the machine at the point where the sewing Automatic Fabric Sensor System direction changes. (Automatic Presser Foot S Pressure) 1 The thickness of the fabric is automatically detected and the presser foot pressure is Sewing Basics - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 106
USEFUL FUNCTIONS Needle Position - Stitch Placement When the "Needle Position - Stitch Placement" is on, the needle will be partially lowered for precise stitch placement and then press the "Needle Position" button again to lower the needle completely. Each press of the "Needle Position" button - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 107
Sewing Basics USEFUL FUNCTIONS S 1 Sewing S-19 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 108
Zigzag Stitch 31 ■ Appliqué (Using a Zigzag Stitch 31 ■ Patchwork (for Crazy Quilt 32 ■ Sewing Curves (Using a Zigzag Stitch 32 ■ Cord Guide Bobbin Cover (Using a Zigzag Stitch 32 Elastic Zigzag Stitches 33 ■ Tape Attaching 33 ■ Overcasting 33 Overcasting 33 ■ Overcasting Using Presser Foot - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 109
SELECTING UTILITY STITCHES SELECTING UTILITY STITCHES S Selecting a Stitch ■ Using the Mirror Image Key Depending on the type of utility stitch you select, 2 you may be able to sew a horizontal mirror image of There are 5 categories of Utility Stitches. the stitch. Utility Stitches a Turn - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 110
SELECTING UTILITY STITCHES ■ Using the Image Key You can display an image of the selected stitch. You can check and change the colors of the image of the screen. a Press . → An image of the selected stitch is displayed. b Press to change the thread color of the stitch on the screen. * Press - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 111
■ Retrieving Saved Settings a Select a stitch. Memo • When a stitch is selected, the last settings retrieved are displayed. The last settings retrieved are retained even if the machine was turned off or a different stitch was selected. b Press . → The memory function screen appears. c Press . d - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 112
SEWING THE STITCHES SEWING THE STITCHES Straight Stitches See page S-62 for the detailed information of stitches. Stitch Stitch name Straight stitch (Left) Presser foot Straight stitch (Left) Straight stitch (Middle) Straight stitch (Middle) Triple stretch stitch Stem stitch Decorative - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 113
e Press the forward. "Start/Stop" button to sew a Reverse stitches → The machine will begin sewing slowly. SEWING THE STITCHES ■ Changing the Needle Position (Left or Middle Needle Position Stitches Only) S When you select left or middle needle position stitches, you can use and in the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 114
plate during sewing. The straight stitch foot is perfect to reduce puckering on lightweight fabrics. The small opening on the foot provides support for the fabric as the needle travels through the fabric. a Seam b Presser foot c Centimeters d Inches e Needle plate f 16 mm (5/8 inch) For stitches - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 115
SEWING THE STITCHES e Grasp the bobbin case, and then pull it out. h Insert the bobbin case in its original position, and then attach the needle plate cover. S i After reinstalling the needle plate select any of the straight stitches. cover, 2 Utility Stitches a Bobbin case f Use the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 116
SEWING THE STITCHES ■ Basting a Select and attach presser foot "J". b Press the "Reverse Stitch" button to sew reinforcement stitches, then continue sewing. Dart Seam a Select and attach presser foot "J". b Sew dart a reverse stitch at the beginning of and then sew from the wide end to - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 117
e Iron the dart to one side so that it is flat. SEWING THE STITCHES d Sew two rows the seam line, of straight stitches parallel then trim excess thread to leaving 50 mm (approx. 1-15/16 inches). S 2 Utility Stitches Gathering Use on waists of skirts, sleeves of shirts, etc. a Select a - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 118
SEWING THE STITCHES reinforcement stitch and trim the thread automatically at the end of sewing. Finished flat fell seam a About 12 mm (approx. 1/2 inch) b Wrong side c Spread the fabric out along the finish line. a Surface Pintuck a Mark along the fabric. the folds on the wrong side of - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 119
d Sew a straight stitch along the fold. * When the automatic thread cutting and automatic reinforcement stitching are preset, reinforcement stitches will be sewn automatically at the beginning of sewing. Press the "Reverse Stitch" button to sew a reinforcement stitch and trim the thread - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 120
desired width of fabric and position it over the lower fabric, then sew so that the stitch bridges both pieces of fabric. c Snap the cord guide bobbin cover into place, making sure that the gimp thread can be fed freely. * Make sure there are no restrictions when feeding the thread. ■ Sewing - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 121
Elastic Zigzag Stitches Use elastic zigzag stitches for tape attaching, overcasting, darning, or a wide variety of other uses. See page S-62 for the detailed information of stitches. Stitch Stitch name 2 steps elastic zigzag Presser foot SEWING THE STITCHES ■ Overcasting Use this stitch to - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 122
Presser Foot "J" See page S-62 for the detailed information of stitches. Stitch Stitch name Overcasting stitch Presser foot b Lower the foot guide presser foot so that the presser is set flush against the edge of the fabric. Overcasting stitch Overcasting stitch Overcasting stitch Single - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 123
b Sew with the needle dropping the edge of the fabric. slightly off a Needle drop position Note • Use the "L/R SHIFT" setting for fine tuning the placement of the stitch. Be sure to sew trial stitches using the same conditions as the real sewing. Quilting You can make beautiful quilts quickly - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 124
SEWING THE STITCHES Stitch Stitch name Rick-rack stitch Decorative stitch Decorative stitch Hemstitching Hemstitching Single diamond overcast Overcasting stitch Piecing stitch (Right) Presser foot Note • The width range of stitch setting is only available in the Quilting stitch "Q" - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 125
SEWING THE STITCHES Memo • Using a straight stitch (middle needle position) makes it easier to sew smoothly (see page S-24). • For models equipped with the guideline marker: In the case Q-01(center, at width 3.5 mm) is selected, if the guideline marker is set at 10.0 mm (3.5 mm plus 6.5 mm, close - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 126
SEWING THE STITCHES You can use the appliqué technique to attach appliqué designs like the three pictured below. e Set the "Width Control" to "ON". a Dresden plate b Stained glass c Sunbonnet sue ■ Quilting with Satin Stitches For better fabric control, use the foot controller to sew with satin - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 127
■ Free Motion Quilting With free motion quilting, the feed dogs can be lowered by pressing , so that the fabric can be moved freely in any direction. In this mode, the presser foot is raised to the necessary height for free motion sewing. We recommend attaching the foot controller and sewing at a - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 128
SEWING THE STITCHES g Press mode. to cancel the free motion sewing → Rotate the handwheel toward you (counterclockwise) to raise the feed dogs. Memo • Do not be discouraged with your initial results. The technique requires practice. Blind Hem Stitches Secure the bottoms of skirts and pants - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 129
. a Free arm j Position the fabric with the edge of the folded hem against the guide of the presser foot, and then lower the presser foot lever. a Needle drop point When these cases, follow the instructions below to solve the problem. a Wrong side of fabric b Fold of hem c Guide Sewing S-41 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 130
a Wrong side of fabric b Right side of fabric l Sew with the fold of the hem against the presser foot guide. m Remove the the fabric. basting stitching and reverse 1 2 1 2 a Wrong side of fabric b Right side of fabric ■ If the Needle does - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 131
c Attach needle presser foot "J". Check that the drops slightly off the edge of the appliqué, then start sewing. SEWING THE STITCHES ■ Appliqué Corners Stop the machine with the needle in the right position of the outside (or inside) corner of the S appliqué. Raise the presser foot and - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 132
off the edge of the fabric, and start sewing. Memo • To make shell tucks at the edge of a collar or neckline, follow the pattern's instructions and then use this stitch to make a decorative finish on the collar or neckline. Scallop Stitches This wave-shaped satin stitch is called the scallop - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 133
SEWING THE STITCHES c Trim along the seam, making the stitches. sure not to cut c Select a stitch for top stitching. S d Place the machine, fabric right side up in the and center the presser foot over 2 the seam when sewing. Utility Stitches Memo • Use a seam sealant to secure the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 134
SEWING THE STITCHES e Pull the bobbin threads to obtain the desired amount of gather, and then smooth the gathers by ironing them. Fagoting When there is a space between two fabrics with thread sewn over the space to join the fabrics together, it is called fagoting. Use this stitch when sewing - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 135
SEWING THE STITCHES Tape or Elastic Attaching a Select a straight foot "J". stitch and attach presser b Set the stitch length to 3/16 inch), and loosen 4.0 the mm (approx. upper thread tension to 2.0 (see "Setting the Stitch Length" on page S-10 and "Setting the Thread Tension" on page - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 136
can be obtained if you use a "130/705H Wing" needle when sewing these patterns. If using a wing needle and the stitch width has been set manually, check that the needle will not touch the presser foot by carefully rotating the handwheel toward you (counterclockwise) before starting to sew. b Select - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 137
SEWING THE STITCHES d Press to create a mirror image of the c Sew the decorative stitch in the the five threads created above. center of stitch. S e Match beginning needle drop points on the opposite edge of the open area to keep the 2 stitching symmetrical. Utility Stitches ■ - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 138
SEWING THE STITCHES Stitch Stitch name Bound buttonhole Presser foot Keyhole buttonhole Tapered keyhole buttonhole Keyhole buttonhole a Select a buttonhole stitch, buttonhole foot "A". and attach b Mark the position and length buttonhole on the fabric. of the 2 1 One-step - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 139
SEWING THE STITCHES Note • Pass the thread underneath the presser foot. • Slide the outside frame of the buttonhole foot backward as far as possible as shown in the illustration, making sure that there is no gap behind the part of the foot marked "A". If the buttonhole foot is not slid back as far - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 140
SEWING THE STITCHES ■ Sewing Stretch Fabrics When sewing on stretch fabric with or , sew the buttonhole stitches over a gimp thread. a Hook the gimp thread onto the back of presser foot "A". Insert the ends into the grooves at the front of the presser foot, and then temporarily tie them - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 141
Darning Use darning stitches for mending and other applications. See page S-62 for the detailed information of stitches. Stitch Stitch name Darning Presser foot SEWING THE STITCHES c Check that the needle drops at the desired position and lower the presser foot, making sure the upper thread - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 142
SEWING THE STITCHES e Gently hold the end of the upper thread, and then press the "Start/Stop" button to start the machine. Memo • Bar tacks can be between 5 mm (approx. 3/16 inch) and 28 mm (approx. 1-1/16 inches). Bar tacks are usually between 5 mm (approx. 3/16 inch) and 10 mm (approx. 3/8 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 143
SEWING THE STITCHES e Lower the buttonhole lever so that it is positioned behind the metal bracket on the ■ Bar Tacks on Thick Fabrics Place a piece of folded fabric or cardboard beside buttonhole foot. the fabric being sewn to level the buttonhole foot S and allow for easier and even - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 144
SEWING THE STITCHES c Attach button button sewing foot "M", slide the along the metal plate and into the presser foot, and lower the presser foot. ■ Attaching 4 Hole Buttons Sew the two holes closest to you. Then raise the presser foot and move the fabric so that the needle goes into the next - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 145
Eyelet Use this stitch for making belt holes and other similar applications. See page S-62 for the detailed information of stitches. Stitch Stitch name Eyelet Presser foot SEWING THE STITCHES e Use the eyelet punch to center of the stitching. make a hole in the S 2 Utility Stitches - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 146
while stitching backward. f Select and sew seam "4" as shown. a Start Point d Select and sew seam "2" as shown. * The fabric will move sideways, guide the fabric by hand to keep sewing straight. → The seam will be connected to the starting point of seam 1. Zipper Insertion ■ Centered Zipper - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 147
SEWING THE STITCHES b Attach presser foot "J" and sew straight stitches up to the zipper opening. Change to a basting stitch (see page S-28) and sew to the top of the fabric. a Basting stitches b Reverse stitches c End of zipper opening d Wrong side c Press the seam allowance open and attach - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 148
SEWING THE STITCHES b Attach presser foot "J" and sew straight stitches up to the zipper opening. Change to a basting stitch and sew to the top of the fabric. e Align the right side of the pin in zipper foot "I" with the presser foot holder, and attach the presser foot. a Reverse stitches b - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 149
CAUTION • Make sure the needle does not strike the zipper during sewing. If the needle strikes the zipper, the needle may break, leading to injury. i Close the zipper, turn sew a basting stitch. the fabric over, and SEWING THE STITCHES n Open seam. the zipper and sew the rest of the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 150
3 steps elastic zigzag Overcasting stitch Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle General sewing, gather, pintuck, etc. 0.0 0.0 - 7.0 2.5 0.2 - 5.0 OK (0) (0 - 1/4) (3/32) (1/64 - 3/16) ( J ) General sewing - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 151
STITCH SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle Overcasting stitch Reinforcing of heavyweight fabric 5.0 (3/16) 2.5 - 5.0 (3/32 - 3/16) 2.5 (3/32) 0.4 - 5.0 (1/64 - 3/16) NO - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 152
for invisible appliqué or attaching binding Background quilting Hemming woven fabrics Stitch width [mm (inch)] Auto. Manual 1.5 (1/16) 0.0 - 7.0 (0 - 1/4) 7.0 (1/4) 0.0 - 7.0 (0 - 1/4) 00 3← - →3 Blind hem stitch stretch Hemming stretch fabric 00 3← - →3 Blanket stitch Shell tuck edge - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 153
Honeycomb stitch Honeycomb stitch Hemstitching Hemstitching Presser foot Applications Stitch width [mm (inch)] Auto. Manual Decorative stitching and attaching elastic 5.0 (3/16) 0.0 - 7.0 (0 - 1/4) Decorative stitching and appliqué 6.0 (15/64) 0.0 - 7.0 (0 - 1/4) Decorative stitching - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 154
SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle Hemstitching Heirloom, decorative hems 6.0 (15/64) 0.0 - 7.0 (0 - 1/4) 4.0 0.4 - 5.0 OK (3/16) (1/64 - 3/16) ( J ) Hemstitching - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 155
STITCH SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle Keyhole buttonhole Tapered keyhole buttonhole Keyhole buttonhole Darning Buttonholes in heavyweight or thick fabrics for larger flat - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 156
STITCH SETTING CHART Stitch Stitch name Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle Forward (Zigzag) Reverse (Zigzag) Piecing stitch (Middle) For attaching appliqué on tubular pieces of fabric and - mitering - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 157
Reinforcement of stretch fabric or decorative stitching 4.00 (3/16) 0.00 - 7.00 (0 - 1/4) Stitch length [mm (inch)] Auto. Manual Twin needle 1.4 (1/16) 0.2 - 5.0 (1/64 - 3/16) NO 2.0 (1/16) 0.2 - 5.0 (1/64 - 3/16) NO 2.5 (3/32) 0.4 - 5.0 (1/64 - 3/16) NO 2.5 (3/32) 0.4 - 5.0 (1/64 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 158
S Sewing 3 Chapter Character/Decorative Stitches SELECTING STITCH PATTERNS 71 Selecting Decorative Stitch Patterns/7mm Decorative Stitch Patterns/Satin Stitch Patterns/7mm Satin Stitch Patterns/Cross Stitch/Utility Decorative Stitch Patterns ...........72 Characters 72 ■ Deleting Characters 73 ■ - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 159
SELECTING STITCH PATTERNS SELECTING STITCH PATTERNS S Press to display the screen below. There are 7 categories of Character/Decorative stitch patterns. 3 a c b d e f g h i j k l Character/Decorative Stitches a Decorative stitch patterns b 7mm decorative stitch patterns. You can - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 160
. → The selected pattern is displayed. Memo • There are four fonts for alphabet character stitching, and a font for Japanese character stitching. Refer to the Quick Reference Guide for the details about the different font selections available. c Press a tab to change the selection screens. S-72 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 161
d Press and then enter "B". h Press SELECTING STITCH PATTERNS and then enter "ky". S 3 Character/Decorative Stitches e Press and then enter "lue". * If you want to continue entering characters in a different font, press , and then repeat from step b. ■ Deleting Characters a Press to - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 162
SELECTING STITCH PATTERNS ■ Adjusting the Character Spacing The space between the characters can be adjusted. b Press or to adjust character spacing. a Press * Press . to display on the screen. → The character spacing window appears. * Press to increase the character spacing and press to - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 163
your project. • When sewing satin stitch patterns, there may be shrinking or bunching of stitches, so be sure to attach a stabilizer material. • Guide the fabric with your hand to keep the fabric feeding straight and even during sewing. Fabric When sewing on stretch fabrics, lightweight fabrics - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 164
may not turn out correctly. Also, depending on the pattern, there may be movement to the left and right as well as front and back. Guide the fabric with your hand to keep the fabric feeding straight and even during sewing. e Press the sewing. "Start/Stop" button to stop f Press the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 165
b Attach monogramming the pattern. foot "N" and sew c Compare the finished pattern to the illustration of the correct pattern below. d Press , and then adjust the pattern with the "Fine Adjust Verti." or "Fine Adjust Horiz." displays. SEWING STITCH PATTERNS * If the pattern is bunched: - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 166
EDITING STITCH PATTERNS EDITING STITCH PATTERNS ■ Key Functions You can create just the finish you want using the editing functions. Make patterns larger or smaller, make mirror images, etc. Note • Some editing functions cannot be used with certain stitch patterns. Only the functions for the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 167
EDITING STITCH PATTERNS No Display . Key Name b Pivot key Explanation Press this key to select the pivot setting. When the pivot setting is selected, stopping the machine lowers the needle and slightly raises the presser foot automatically. In addition, when sewing is restarted, the presser - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 168
EDITING STITCH PATTERNS Changing the Size Creating a Vertical Mirror Image Select a stitch pattern, then press to change the size of the stitch pattern. The stitch pattern will be sewn in the size highlighted on the key. To create a vertical mirror image, select a stitch pattern then press . - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 169
EDITING STITCH PATTERNS Memo • To finish a complete motif while sewing the pattern continuously, you can press the key while sewing. The machine will automatically stop when the motif is finished. Changing Thread Density (for Satin Stitch Patterns Only) Returning to the Beginning of the Pattern - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 170
EDITING STITCH PATTERNS Checking the Image You can display an approximate size image of the selected stitch pattern. You can also check and change the colors of the image on the screen. a Press . → An image of the selected pattern is displayed. b Press to change the thread color in the image to - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 171
COMBINING STITCH PATTERNS COMBINING STITCH PATTERNS S You can combine many varieties of stitch patterns, such as character stitches, cross stitches, satin stitches, or stitches you design with "MY CUSTOM STITCH" function (see page S-96 for information about "MY CUSTOM STITCH"). You can also - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 172
COMBINING STITCH PATTERNS e Select . a Press . → The large size stitch will be selected. b Press again, then press the small size. to select f Press g Press to sew the pattern continuously. . → The pattern is displayed in a smaller size. c Press to sew continuously. Memo • Patterns are - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 173
Combining Horizontal Mirror Image Stitch Patterns Example: COMBINING STITCH PATTERNS Combining Stitch Patterns of Different Length S Example: 3 Character/Decorative Stitches a Press . b Press again, then press . a Press , then press once. → The length of the image is set to . b - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 174
COMBINING STITCH PATTERNS c Press . Example: → The entered pattern is repeated. Making Step Stitch Patterns (for 7mm Satin Stitch Patterns Only) a Press . b Press . You can use the keys with 7mm satin stitch patterns to create a step effect. Stitch patterns sewn so that they create a step - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 175
e Press . COMBINING STITCH PATTERNS Press → → → . S 3 Character/Decorative Stitches → The entered pattern is repeated. ■ More Examples Press → → → → . Press → → → → → → → → . Press → → → → → → → → . Sewing S-87 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 176
USING THE MEMORY FUNCTION USING THE MEMORY FUNCTION Stitch Data Precautions Observe the following precautions when using stitch data other than that created and saved in this machine. ■ Types of Stitch Data that can be Used • In the Character/Decorative Stitch memory, ".pmv", ".pmx" and ".pmu" - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 177
Saving Stitch Patterns in the Machine's Memory You can save often used stitch patterns in the machine's memory. A total of about 1 MB of stitch patterns can be saved in the machine's memory. Note • Do not turn the main power to OFF while the "Saving" screen is displayed. You will lose the stitch - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 178
USING THE MEMORY FUNCTION c Press . → A confirmation message appears. d Press . * If you decide not to delete the stitch pattern, press . Saving Stitch Patterns to USB Media When sending stitch patterns from the machine to USB media, plug the USB media into the machine's top USB port. Memo • - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 179
and check the orientation of the connector. • For details on the position of the USB port on the computer (or USB hub), refer to the instruction manual for the corresponding equipment. Sewing S-91 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 180
USING THE MEMORY FUNCTION c Press . Retrieving Stitch Patterns from the Machine's Memory a Press . d Press * Press saving. . to return to the original screen without → The pocket selection screen appears. b Choose a stitch pattern to retrieve. * If the entire saved stitch pattern is not - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 181
USING THE MEMORY FUNCTION Recalling from USB Media You can recall a specific stitch pattern from either direct USB media or a folder in the USB media. If the stitch pattern is in a folder, check each folder to find the stitch pattern. a Insert the USB Media into the the machine (see page S-90). - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 182
USING THE MEMORY FUNCTION e Press . * Press to delete the stitch pattern. The pattern will be deleted from the USB media. c Move/copy Disk". the pattern data to "Removable → The selected stitch pattern is recalled and the sewing screen will be displayed. Recalling from the Computer a - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 183
f Press . * Press to delete the stitch pattern. The pattern will be deleted from the "Removable Disk" folder in your computer. USING THE MEMORY FUNCTION S 3 Character/Decorative Stitches → The selected stitch pattern is recalled and the sewing screen will be displayed. Note • The pattern - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 184
S Sewing 4 Chapter MY CUSTOM STITCH DESIGNING A STITCH 97 ENTERING STITCH DATA 99 ■ Key Functions 99 ■ Moving a Point 101 ■ Moving Part or All of the Design 102 ■ Inserting New Points 103 USING STORED CUSTOM STITCHES 104 Storing Custom Stitches in Your List 104 ■ If the Memory is Full 104 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 185
DESIGNING A STITCH DESIGNING A STITCH S By using the "MY CUSTOM STITCH" function, you can register stitches you have created yourself. b Decide the spacing of the stitch. 4 You can also sew designs combining "MY * By adjusting the spacing of a stitch, you can create CUSTOM STITCH" creations - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 186
DESIGNING A STITCH Examples of Custom Stitches Stitch Stitch Stitch 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 12 18 22 23 21 17 14 12 9 6 3 1 3 6 0 0 3 6 10 13 14 13 11 13 14 13 10 6 3 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 12 41 43 40 41 38 35 32 30 32 35 41 45 47 44 0 0 4 7 11 13 14 13 10 6 3 0 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 187
ENTERING STITCH DATA ENTERING STITCH DATA S ■ Key Functions 4 p a o n MY CUSTOM STITCH m b l c d k j e i f h g a This area displays the stitch being created. b Displays the number of the present set point over the total number of points in the stitch. c Displays the y- - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 188
ENTERING STITCH DATA a Press . b Press . * Press created. to enlarge the image of the stitch being a b c Use to move to the coordinates of the first point on the grid sheet. * Press sheet. to change the direction of the grid a Currently selected point/Total number of points b - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 189
f Use to move and press . to the second point ENTERING STITCH DATA Memo • If you have entered points that are too close together, the fabric may not feed properly. S Edit the stitch data to leave a larger space between points. 4 • If the stitch design is to be repeated and linked, make - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 190
ENTERING STITCH DATA b Use to move the point. b Press . ■ Moving Part or All of the Design a Press or to move to the first point of the section that you want to move. * To move to the first point, press . * To move to the last point, press . * You can also move by using the touch pen. - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 191
d Press . b Press . ENTERING STITCH DATA S 4 MY CUSTOM STITCH → The section will be moved. ■ Inserting New Points a Press or to move to a place on the design where you want to add a new point. * To move to the first point, press . * To move to the last point, press . * You can also - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 192
USING STORED CUSTOM STITCHES USING STORED CUSTOM STITCHES Storing Custom Stitches in Your List Stitch patterns created using the "MY CUSTOM STITCH" function can be stored for later use. Once you finish entering the stitch data, press . The "Saving" message appears and the stitch will be stored - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 193
Retrieving Stored Stitches a Press . USING STORED CUSTOM STITCHES c Press . * To delete the stored stitch pattern, press . S * To edit the stored stitch pattern, press . 4 MY CUSTOM STITCH → A list of stored stitch patterns is displayed. b Select the stitch pattern. * Press to return - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 194
USING STORED CUSTOM STITCHES S-106 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 195
Embroidering This section provides instruction to embroider designs with this machine. Page number starts with "E" in this section. The screen display and machine illustration may vary slightly, depending on the countries or regions. Chapter1 Embroidery E-2 Chapter2 Embroidery Edit E-56 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 196
E Embroidering 1 Chapter Embroidery SELECTING PATTERNS 3 ■ Copyright Information 3 Selecting Embroidery Patterns/Brother "Exclusives"/Floral Alphabet/Bobbin Work Patterns 4 Selecting Character Patterns 5 Selecting Frame Patterns 7 Selecting Patterns from Embroidery Cards 7 ■ About Embroidery - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 197
patterns stored in the machine's memory (see the "Quick Reference Guide" for a full summary of patterns in the machine's memory). You . a b c d e f g h i j a Embroidery patterns b Brother "Exclusives" c Floral alphabet patterns d Frame patterns e Character patterns f Bobbin work - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 198
SELECTING PATTERNS Selecting Embroidery Patterns/Brother "Exclusives"/Floral Alphabet/Bobbin Work Patterns c Press to create a mirror image of the pattern as needed. * If a mistake has been made when selecting the pattern, - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 199
Selecting Character Patterns Example: Entering "We Fly". a Press . b Press the key embroider. of the font you want to SELECTING PATTERNS * If you want to change the size of a character, select the character and then press to change the size. The size changes each time you press the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 200
SELECTING PATTERNS g Press again and enter "F". i Press . h Press and then enter "ly". → The embroidery screen is displayed. j Proceed to "VIEWING THE EMBROIDERING SCREEN" on page E-9 to embroider the pattern. * To return to the previous screen to select another pattern, press . E-6 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 201
Selecting Frame Patterns a Press . SELECTING PATTERNS e Proceed to "VIEWING THE EMBROIDERING SCREEN" on page E-9 to embroider the pattern. E * To return to the previous screen to select another pattern, press . 1 Embroidery b Press the key to embroider of in the the frame shape - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 202
SELECTING PATTERNS a Plug the optional embroidery card Reader/USB card writer module into the USB port on the machine. c Press the key of the USB port. a USB port b Embroidery card Reader/USB card writer module b Insert the card completely into the Reader/USB card writer module. card * - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 203
VIEWING THE EMBROIDERING SCREEN VIEWING THE EMBROIDERING SCREEN E hi a j 1 b k Embroidery c l d e m f g a Shows the presser foot code. Attach embroidery foot "W+" or "W" for all embroidery projects. When the foot presser symbol is displayed on the screen, you are able to sew. b - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 204
VIEWING THE EMBROIDERING SCREEN ■ Key Functions Using these keys, you can change the size of the pattern, rotate the pattern, etc. Note Q • Some operations or functions are not available for certain patterns. If the key display is light gray, you cannot use that function or operation with the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 205
Iron-on Stabilizers (Backing) to the Fabric For best results in your embroidery projects, always use stabilizer material for embroidery. Follow the package instructions for the stabilizer being used. When using fabrics that cannot be ironed (such as towel or fabrics that have loops which expand when - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 206
PREPARING THE FABRIC b Iron the iron-on stabilizer wrong side of the fabric. material to the a Fusible side of stabilizer b Fabric (wrong side) Memo • When embroidering on thin fabrics such as organdy or lawn, or on napped fabrics such as towel or corduroy, use water soluble stabilizer (sold - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 207
PREPARING THE FABRIC Hooping the Fabric in the Embroidery Frame ■ Types of Embroidery Frames The types and numbers of supplied embroidery frame are differs depending on the countries and regions. E 1 Extra Large Large Medium Embroidery Embroidery field 30 cm × 18 cm (approx. 12 inches × 7 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 208
PREPARING THE FABRIC ■ Inserting the Fabric Note • If the fabric is not securely held in the embroidery frame, the embroidery design will sew out poorly. Insert the fabric on a level surface, and gently stretch the fabric taut in the frame. Follow the steps below to insert the fabric correctly. a - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 209
you made on the fabric. E 1 Embroidery Memo • You can use the included screwdriver when you loosen or tighten the frame adjustment screw. a Inner frame b Guide line c Gently stretch the fabric so folds or wrinkles, and press there are the inner no frame into the outer frame. ■ Using the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 210
■ Embroidering Ribbons or Tape Secure with double-sided tape or a temporary spray adhesive. Use an embroidery stabilizer to provide extra support. After embroidering, remove the stabilizer carefully. Attach the stabilizer as shown in the following examples. We recommend using a stabilizer for - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 211
bobbin before attaching the embroidery frame. 1 Embroidery a Press the "Presser Foot raise the presser foot. Lifter" button to b Align the embroidery frame guide with the right edge of the embroidery frame holder. d Lower the frame-securing lever to be level with the frame to secure the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 212
ATTACHING THE EMBROIDERY FRAME b Pull the embroidery frame toward you. E-18 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 213
CONFIRMING THE PATTERN POSITION CONFIRMING THE PATTERN POSITION E The pattern is normally positioned in the center of the embroidery frame. If the pattern needs to be repositioned for better placement on the garment, you can check the layout before starting embroidery. 1 Embroidery Checking - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 214
CONFIRMING THE PATTERN POSITION Previewing the Completed Pattern a Press . → An image of the pattern as it will be embroidered appears. b Press used in the preview. to select the frame * Frames displayed in light gray cannot be selected. * Press to enlarge the image of the pattern. * The - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 215
SEWING AN EMBROIDERY PATTERN SEWING AN EMBROIDERY PATTERN E Embroidery Attractive Finishes 1 There are many factors that go into beautiful embroidery. Using the appropriate stabilizer (see page E-11) and hooping the fabric in the frame (see page E-13) are two important factors mentioned earlier - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 216
SEWING AN EMBROIDERY PATTERN ■ Embroidery Needle Plate Cover Under some conditions, based on the type of fabric, stabilizer, or thread being used, there may be some looping in the upper thread. In this case, attach the included embroidery needle plate cover to the needle plate. Attach the cover by - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 217
b Lower the presser foot, then press the "Start/Stop" button to start embroidering. After 5-6 stitches, press the "Start/Stop" button again to stop the machine. c Trim the excess thread at the end of the seam. If the end of the seam is under the presser foot, raise the presser foot, then trim - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 218
SEWING AN EMBROIDERY PATTERN a Attach side of an iron-on stabilizer to the appliqué material. the wrong d Place the frame. base material into the embroidery a Appliqué material (cotton, felt, etc.) b Iron-on stabilizer b Place the appliqué material into the embroidery frame, and then - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 219
g Press the "Start/Stop" button. Memo • Some patterns may not show all three appliqué steps. Sometimes the "APPLIQUE" step will be shown as a color. → The appliqué will then be completed. h Change the rest the upper thread and of the embroidering. then carry out SEWING AN EMBROIDERY PATTERN - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 220
ADJUSTMENTS DURING THE EMBROIDERY PROCESS ADJUSTMENTS DURING THE EMBROIDERY PROCESS Note • Be careful not to bump the embroidery unit carriage or the presser foot when removing or attaching the embroidery frame. Otherwise, the pattern will not embroider correctly. If the Bobbin Runs Out of Thread - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 221
ADJUSTMENTS DURING THE EMBROIDERY PROCESS If the Thread Breaks During Sewing a Press the "Start/Stop" machine. button to stop the b If the upper thread is broken, redo the upper threading. If the bobbin thread is broken, press and follow the directions in steps a through e from the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 222
stopped Note • Do not remove the embroidery unit or the memory will no longer remember your design. a Turn the main power to ON. b Follow the instructions shown on the and remove the embroidery frame. screen → The following message will appear. E-28 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 223
c Attach the embroidery frame and press . ADJUSTMENTS DURING THE EMBROIDERY PROCESS E 1 Embroidery → The previous embroidery screen displayed before the machine was turned off appears. Memo • If you want to start a new embroidery pattern, press so the pattern selection screen appears. d - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 224
MAKING EMBROIDERY ADJUSTMENTS MAKING EMBROIDERY ADJUSTMENTS Adjusting Thread Tension a Press . When embroidering, the thread tension should be set so that the upper thread can slightly be seen on the wrong side of the fabric. ■ Correct Thread Tension The pattern can be seen from the wrong side - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 225
MAKING EMBROIDERY ADJUSTMENTS b Press to tighten the upper thread To adjust the bobbin tension for embroidery function, using the bobbin case (with no color on tension. (The tension number will increase.) the screw), turn the slotted-head screw (-) with a (small) screwdriver. E 1 Embroidery - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 226
MAKING EMBROIDERY ADJUSTMENTS ■ Bobbin Thread is Too Tight a Press . Upper thread on the right side of fabric seems to be lifting/looping and bobbin thread is not seen on the wrong side of fabric. a Right side b Wrong side If this occurs, turn the slotted-head screw (-) counterclockwise, being - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 227
Note • When this function is turned on, use the included ball point needle 75/11 for embroidering patterns with short jump stitches such as alphabet characters. Using other needles may cause the thread to break. a Press . MAKING EMBROIDERY ADJUSTMENTS ■ Selecting the Length of Jump Stitch Not to - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 228
MAKING EMBROIDERY ADJUSTMENTS Memo • "spm" is the number of stitches sewn in one minute. • Decrease the sewing speed when embroidering on thin, thick, or heavy fabrics. • The sewing speed can be changed after an embroidery has been started. • The maximum sewing speed setting does not change until a - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 229
Changing the "Embroidery Frame Display" a Press . b In the "Embroidery Frame Display", use to change the embroidery frame display mode. * There are 16 choices. MAKING EMBROIDERY ADJUSTMENTS E 1 Embroidery * For the optional embroidery frame. a Extra large frame embroidering area 30 cm × 18 cm - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 230
REVISING THE PATTERN REVISING THE PATTERN CAUTION • When you have revised the pattern, check the display of available embroidery frames and use an appropriate frame. If you use an embroidery frame not displayed as available for use, the presser foot may strike the frame and possibly cause injury. - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 231
a Mark the embroidery fabric, as shown. start position on the REVISING THE PATTERN d Press . E e Use to align the needle and the mark on the fabric, and begin embroidering the 1 pattern. Embroidery b Press . Changing the Size of the Pattern a Press . c Press . a b a Start - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 232
REVISING THE PATTERN a a Size of the pattern Rotating the Pattern a Press . Memo • Some patterns or characters can be enlarged more than others. • Some patterns or characters can be enlarged to a greater degree if they are rotated 90 degrees. • You can change the size of the pattern by rotating - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 233
a Degree of rotation REVISING THE PATTERN Creating a Horizontal Mirror Image E Press so it appears as to create a 1 horizontal mirror image of the selected pattern. Press again to return the pattern to normal. Embroidery a 0° Memo • You can rotate the pattern by rotating the mouse wheel. - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 234
REVISING THE PATTERN Changing the Density (Alphabet Character and Frame Patterns Only) The thread density for some alphabet character and frame patterns can be changed. A setting between 80% and 120% in 5% increments can be specified. a Press . * Press to display all the function keys on the screen. - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 235
b After a character is sewn, change the thread color, and then sew the next character. b Press . REVISING THE PATTERN E 1 Embroidery Embroidering Linked Characters c Press . Follow the procedure described below to embroider linked characters in a single row when the entire pattern extends - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 236
REVISING THE PATTERN d Press . e Press . h After the characters are embroidered, cut the threads to a generous length, remove the embroidery frame, and then attach the embroidery frame again so that the remaining characters ("DEF") can be embroidered. f Press to turn off the thread - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 237
m Use to align the needle with the end of embroidering for the previous pattern. REVISING THE PATTERN E 1 Embroidery n Press the "Start/Stop" button to begin embroidering the remaining character patterns. → The thread color displayed on the screen will be grayed out. Uninterrupted - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 238
USING THE MEMORY FUNCTION USING THE MEMORY FUNCTION Embroidery Data Precautions Observe the following precautions when using embroidery data other than that created and saved in this machine. CAUTION • When using embroidery data other than our original patterns, the thread or needle may break when - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 239
USING THE MEMORY FUNCTION • Do not create folders in "Removable Disk" on a computer. If embroidery data is stored in a folder in "Removable Disk", that embroidery data cannot be retrieved by the machine. • Even if the embroidery unit is not attached, the machine will recognize embroidery data. ■ - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 240
USING THE MEMORY FUNCTION b Select the pattern you want to delete. Saving Embroidery Patterns to USB Media When sending embroidery patterns from the machine to USB media, plug the USB media into the machine's USB port. c Press . a b a Amount of memory used by the pattern to be deleted b Amount - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 241
force. Check the orientation of the connector. • For details on the position of the USB port on the computer (or USB hub), refer to the instruction manual for the corresponding equipment. Embroidering E-47 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 242
USING THE MEMORY FUNCTION c Press when the pattern you want to save is in the embroidery screen. Retrieving Patterns from the Machine's Memory a Press . d Press * Press saving. . to return to the original screen without → The machine displays the patterns currently in the memory. b Press - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 243
Recalling from USB Media You can recall a specific embroidery pattern from either direct USB media or a folder in the USB media. If the pattern is in a folder, check each folder to find the embroidery pattern. Note • The processing speed may vary by quantity of data. a Insert the USB media into - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 244
USING THE MEMORY FUNCTION Recalling from the Computer d Press . a Plug the USB cable connector into the corresponding USB ports for the computer and for the machine (see page E-47). b On the computer, open "Computer computer)" then go to "Removable (My Disk". → The patterns in the computer - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 245
EMBROIDERY APPLICATIONS EMBROIDERY APPLICATIONS E Using a Frame Pattern to Make an Appliqué (1) c Apply a thin layer of fabric glue or a temporary spray adhesive to the rear of the 1 appliqué created in step a. Attach the appliqué to the base fabric matching the Embroidery You can use - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 246
EMBROIDERY APPLICATIONS Using a Frame Pattern to Make an Appliqué (2) d Remove the embroidery frame from the embroidery unit, and cut around the outside of the stitches. This is a second method to make appliqué using embroidery patterns. You do not have to change the fabric in the embroidery - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 247
to create a single pattern after each section is sewn. For details on creating split embroidery patterns and for more detailed sewing instructions, refer to the Instruction manual included with PE-DESIGN Ver.7 or later, or PE-DESIGN NEXT. The following procedure describes how to read the split - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 248
EMBROIDERY APPLICATIONS c Press . e Press the "Start/Stop" the pattern section. button to embroider f When embroidering is finished, the following screen appears. Press . d If necessary, edit the pattern. → A screen appears so that a section of the split embroidery pattern can be - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 249
Embroidery EMBROIDERY APPLICATIONS E 1 Embroidering E-55 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 250
E Embroidering 2 Chapter Embroidery Edit EXPLANATION OF FUNCTIONS 57 SELECTING PATTERNS TO EDIT 58 Selecting Embroidery Patterns/Brother "Exclusives"/Floral Alphabet Patterns/Frame/Bobbin Work Patterns 59 Selecting Alphabet Character Patterns 59 EDITING PATTERNS 61 ■ Key Functions 62 Moving - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 251
EXPLANATION OF FUNCTIONS EXPLANATION OF FUNCTIONS E With the "Embroidery Edit" functions, you can combine embroidery patterns and character patterns, change the size of patterns, rotate patterns, and perform many other editing functions. This machine can perform the 9 functions listed below. 2 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 252
instructions on "BEFORE EMBROIDERING" of "Basic operations", and press , then to display the screen below. a b c d e f g h i j a Embroidery patterns b Brother unit for storage. Memo • See included "Quick Reference Guide" for more information on each category's selection screen. E-58 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 253
SELECTING PATTERNS TO EDIT Selecting Embroidery Patterns/Brother "Exclusives"/Floral Alphabet Patterns/Frame/Bobbin Work Patterns Selecting Alphabet Character Patterns E When you select character patterns from the "Embroidery Edit" screen, you can edit - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 254
SELECTING PATTERNS TO EDIT c Press to change the layout of the pattern. * If the characters are too small to see, press to view a display of all entered characters. f After you finish your selections, press . d Select the layout. (Example: ) When selecting an arc, use and to change the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 255
EDITING PATTERNS d a a b b c e c EDITING PATTERNS E 2 d e Embroidery Edit a Shows the size of the entire combined pattern. b Shows the size of the pattern currently selected. c Shows the distance from the center of the frame. d Shows the color sequence and times of each step of the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 256
EDITING PATTERNS ■ Key Functions a b c d fe g h i p no m l k j No. Display Key Name Explanation a Magnify key Press this key to magnify the pattern by 200% in the screen. Page E-63 b Thread palette key Press this key to change the colors of the displayed pattern. E-67 c Rotate key - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 257
EDITING PATTERNS Moving the Pattern Displaying Patterns in the Screen Magnified by 200% E For details on moving the pattern, refer to "Moving the Pattern" on page E-36. a Press . 2 Rotating the Pattern Embroidery Edit For details on rotating the pattern, refer to "Rotating the Pattern" - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 258
EDITING PATTERNS Changing the Configuration of Character Patterns a Press . Changing Character Spacing a Press . b Press the key embroider. of the layout you want to * See page E-60 for more information about layout types. b Use to change the spacing. * Press to increase the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 259
not recommended to edit data and transfer to other or older version machines. Same features do not apply in other machines, so problems may occur. • Character spacing can be reduced only when characters are arranged normally on a straight line. Separating Combined Character Patterns E Combined - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 260
EDITING PATTERNS c Use to select where the pattern is to be separated, and then press to separate it. For this example, the pattern will be separated between "T" and "a". Changing the Color of Each Alphabet Character in a Pattern a Press so you can assign a thread color to each character. - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 261
EDITING PATTERNS Embroidering Linked Characters You can embroider linked characters exampled below, in a single row when the pattern extends beyond the embroidery frame. For details on embroidering linked characters, refer to "Embroidering Linked Characters" on page E-41. Example: Linking "DEF" to - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 262
Anton thread colors contained in the custom thread table. 300 Robison-Anton thread colors table data can be downloaded from our website " http://solutions.brother.com ". a In the pattern editing screen, press and then press . c Use to select one of the thread brands in the machine. d Use to - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 263
e Press . g Press EDITING PATTERNS to return to the original screen. E 2 Embroidery Edit b a a Thread brand b Entered thread color number → The selected thread color is set in the custom thread table. Note • If is not pressed, the thread color number will not be changed. f Repeat the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 264
EDITING PATTERNS e Repeat the previous steps until thread colors are specified. all desired * To delete a specified color from the palette, select the color to be deleted, and then press . * To delete all the specified color from the palette, press . f Press to return to the original - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 265
EDITING PATTERNS a Insert the USB media containing the custom thread table data into the USB port. d The recalled custom thread displayed on the screen. table is E Choosing a Color from the Custom Thread Table 2 You can select a color from the up to 300 thread colors you have set in the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 266
EDITING PATTERNS c Press . a Designing Repeated Patterns ■ Sewing Repeated Patterns Using the border function, you can create stitches using repeated patterns. You can also adjust the spacing of the patterns within a repeated pattern stitch. a Select a pattern, and then press . b Press . a - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 267
EDITING PATTERNS e Adjust the spacing of the repeated pattern. * To widen spacing, press . E * To tighten spacing, press . 2 Embroidery Edit b d e a Vertical direction b Horizontal direction c Repeating and deleting vertical keys d Repeating and deleting horizontal keys e Spacing keys → - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 268
EDITING PATTERNS ■ Repeating One Element of a Repeated Pattern c Press . By using the Cut function, you can select one element of a repeated pattern and repeat only that single element. This function allows you to design complex repeated patterns. a Choose the direction pattern will be cut. - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 269
color can be continuously sewn. This allows you to continue sewing without repeatedly changing the upper thread or changing the sewing order manually. Memo • In combined stitch patterns that contain two or more border patterns or other patterns combined with border patterns, the sewing order - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 270
EDITING PATTERNS a Press . b Press . d Press . c Press sewn. to select the thread mark to be Embroidering the Pattern Repeatedly After creating the repeated pattern, rehoop the embroidery frame and keep sewing for the next pattern. Memo • The optional border frame allows you to easily rehoop - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 271
EDITING PATTERNS a Create the repeated pattern with the thread mark at the center of the end of the pattern. e Rehoop the fabric in the embroidery frame. * Refer to "Assigning Thread Marks" on page E-75. Note E • Adjust the position of the fabric so that the embroidering area for the next - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 272
EDITING PATTERNS g Touch to set the starting point to the center top of the pattern. Duplicating a Pattern a Press . h Touch . i Press the positioning keys to move the embroidery frame until the starting point is aligned with the thread mark on the fabric. → The duplicate is positioned - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 273
After Editing a Press . EDITING PATTERNS E 2 Embroidery Edit * To combine the pattern with other patterns, select (see page E-80). * See page E-21 for more information about sewing patterns. Memo • If you want to return to the edit screen after pressing , press . Embroidering E-79 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 274
COMBINING PATTERNS COMBINING PATTERNS Editing Combined Patterns Example: Combining alphabet characters with an embroidery pattern and editing b Select . a Press pattern. to select an embroidery c Press . E-80 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 275
d Press . COMBINING PATTERNS f Select and enter "Flower". * After selecting , press to change the character case, then enter the remaining characters. E 2 Embroidery Edit e Press to enter the alphabet characters. * Press to return to the previous screen. → The characters you enter - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 276
COMBINING PATTERNS j Press to characters. change the color of the * See page E-67 for more information about changing the color. Memo • Use to select patterns that are overlapping and cannot be selected by clicking them or by touching the screen. k When all editing is finished, press . - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 277
Sewing Combined Patterns Combined patterns will be embroidered in the order they were entered. In this example, the embroidery order will be as follows: b Embroider → COMBINING PATTERNS . E 2 Embroidery Edit Note • Follow the directions in "Sewing Embroidery Patterns" on page E-22. a Embroider - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 278
VARIOUS EMBROIDERING FUNCTIONS VARIOUS EMBROIDERING FUNCTIONS Uninterrupted Embroidering (Monochrome - Using a Single Color) A selected pattern can be stitched out in one color instead of multicolor. The machine will hesitate but not stop between color steps, and then continue till the pattern is - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 279
Memo • To cancel the setting, press . → Basting is added to the beginning of the sewing order. f Press the "Start/Stop" embroidering. button to begin USING THE MEMORY FUNCTION g When embroidering basting stitching. is finished, remove the E 2 Embroidery Edit USING THE MEMORY - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 280
USING THE MEMORY FUNCTION E-86 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 281
section provides important information for operating this machine. Please read this section to find troubleshooting tips and pointers as well as how to keep your machine in the best working countries or regions. Chapter1 How to Create Bobbin Work A-2 Chapter2 Maintenance and Troubleshooting A-18 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 282
Embroidering 14 ADJUSTING THE THREAD TENSION 16 ■ Adjusting the upper thread tension 16 ■ Adjusting the tension of the bobbin thread 16 TROUBLESHOOTING 17 ■ The thread was accidentally cut automatically and the bobbin thread is caught inside the machine 17 ■ Correcting bobbin work tension - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 283
ABOUT BOBBIN WORK ABOUT BOBBIN WORK A Beautiful embroidery work, with a three-dimensional appearance, can be created by winding the bobbin with medium to heavy weight thread or ribbon, which is too thick to be threaded through the machine's needle. The decorative thread or ribbon will stitch out - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 284
such as 3.5mm (approx. 1/8 inch) is to be used, we recommend that bobbin case tension not be applied. Refer to page A-7 for more detailed instructions. Note • Do not use thread heavier than No.5 hand embroidery thread. • Some threads may not be appropriate for bobbin work. Be sure to sew trial - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 285
Preparing the Bobbin Thread In order to create bobbin work, the bobbin case must be replaced with the one for bobbin work. Before creating bobbin work, clean the bobbin case and the race. a Raise the needle and presser turn off the machine. foot, and then b Remove the flat bed embroidery - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 286
the thread catching on the tension spring of the bobbin case, the thread completely becoming tangled or damage to the machine. • Do not guide the bobbin thread through the groove in the needle plate cover, otherwise the lower threading cannot be done correctly. a Beginning of wound thread CAUTION - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 287
PREPARING FOR BOBBIN WORK ■ When tension is not applied to the bobbin thread m Gently pull the upper thread to bring the bobbin thread up through the needle plate. If the bobbin thread in the trial stitching is too tight A and adjusting the bobbin case tension does not help, do not pass the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 288
PREPARING FOR BOBBIN WORK p Install the needle cover with tabs. plate cover and bobbin For details on installing the needle plate cover, refer to "Cleaning the Race" on page A-19. a Bobbin cover b Bobbin cover with tabs CAUTION • When creating bobbin work, use the bobbin cover with tabs, - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 289
CREATING BOBBIN WORK (SEWING) CREATING BOBBIN WORK (SEWING) A Positioning the Fabric and Sewing c Increase the upper thread tension. Upper thread tension setting between 6 and 8 is 1 recommended for bobbin work. How to Create Bobbin Work Note • Recommended stitches for bobbin work are open - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 290
CREATING BOBBIN WORK (SEWING) h Use the presser presser foot. foot lever to raise the i With the wrong side facing up, fabric under the presser foot. place the Note • If the bobbin thread does not come up, hold the upper thread as shown below to pull up the bobbin thread. a Wrong side - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 291
q When you have reached the end of stitching area, stop the machine. the Note • Do not sew reverse/reinforcement stitches at the end of the stitching, otherwise the threads may become tangled or the needle may break. In addition, it will be difficult to pull the bobbin thread up to the wrong side - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 292
with an amount of thread for pattern. adequate Note • For an estimated length of bobbin thread required for each pattern, refer to the "Quick Reference Guide" included with the machine. Be sure to use a bobbin wound with enough thread. If the bobbin runs out of thread while sewing, the embroidery - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 293
CREATING BOBBIN WORK (EMBROIDERY) How to Create Bobbin Work CAUTION • When sewing bobbin work, be sure to select an embroidery pattern for bobbin work. If any other type of pattern is selected, the machine may be damaged. Note • Bobbin work embroidery sewing speed defaults to 100 spm when a bobbin - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 294
CREATING BOBBIN WORK (EMBROIDERY) Start Embroidering a Hoop the fabric so the right side of the fabric is facing down with the stabilizer lying on the top. Use an embroidery frame that fits the size of the pattern and then attach the frame to the machine. These patterns are embroidered from - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 295
k Stop the machine, and thread and the bobbin then tie the upper thread together to secure the threads. CREATING BOBBIN WORK (EMBROIDERY) o Remove the fabric from the embroidery frame, and check the finished embroidery. A 1 How to Create Bobbin Work l Start sewing again to finish the - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 296
ADJUSTING THE THREAD TENSION ADJUSTING THE THREAD TENSION After sewing trial stitches and checking the sewing results, adjust the thread tensions if necessary. After adjusting the tensions, be sure to sew trial stitches again in order to check the sewing results. ■ Adjusting the upper thread - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 297
TROUBLESHOOTING TROUBLESHOOTING A Several solutions for minor problems are described below. If the problem persists, contact your dealer or nearest authorized Brother dealer. 1 ■ The thread was accidentally cut automatically and the bobbin thread d Apply slight tension on bobbin thread by - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 298
the Maintenance Message 21 ADJUSTING THE SCREEN 22 Adjusting the Brightness of the Screen Display 22 Touch Panel is Malfunctioning 22 TROUBLESHOOTING 23 Frequent troubleshooting topics 23 Upper thread tightened up 23 ■ Symptom 23 ■ Cause 23 ■ Remedy/check details 23 Tangled thread on wrong - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 299
shock or injury may result. Maintenance and Troubleshooting Restrictions on oiling Cleaning the Machine Casing In , making periodic oiling unnecessary. If problems occur, such as difficulty turning the authorized dealer or the nearest authorized service center. Precautions on storing the machine - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 300
CARE AND MAINTENANCE g Use the cleaning brush to remove any lint and or a vacuum cleaner dust from the race and bobbin thread sensor and the surrounding area. a Cleaning brush b Race c Bobbin thread sensor Note • Do not apply oil to the bobbin case. • If lint or dust collects on the bobbin - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 301
CARE AND MAINTENANCE Maintenance and Troubleshooting Cleaning the Cutter in the Bobbin d Use the screwdriver , it is recommended to take your machine to an authorized dealer or nearest authorized service center for a regular maintenance check. Although this message will disappear and the machine - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 302
ADJUSTING THE SCREEN ADJUSTING THE SCREEN Adjusting the Brightness of the Screen Display If the screen does not look very clear under certain situation, you can adjust the brightness of the screen display. a Press . → The settings screen appears. Touch Panel is Malfunctioning If the screen - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 303
check the following possible problems before requesting service. You can solve most problems by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at " http://solutions.brother.com ". 2 If the problem persists, contact your - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 304
TROUBLESHOOTING d While holding the bobbin in place with your finger, pass the thread through the slit in the needle plate. * Hold down the bobbin with your - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 305
Troubleshooting TROUBLESHOOTING d Raise the lever. presser foot using the presser foot g While holding hand, pass the the thread in your right thread through the thread guide Position" button once or twice to raise the needle. h Guide the thread down, up, then down through the groove, - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 306
TROUBLESHOOTING Incorrect thread tension ■ Symptoms • Symptom 1: The lower thread is visible from the upper side of the fabric. • Symptom 2: The upper thread appears as a straight line - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 307
to complete it forcefully, contact your dealer or nearest authorized service center. ■ Removing the fabric from the machine h Remove or loose threads from the race and its surrounding area. Maintenance and Troubleshooting a Immediately stop the sewing machine. b Turn off the sewing machine - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 308
TROUBLESHOOTING k Slightly tangled lift up the needle plate, cut any threads, a If the fabric cannot be removed, even after completing these steps, contact your dealer or nearest authorized service center. l Remove any threads the feed dogs. in the race and around m Turn the handwheel to - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 309
Removing the fabric from the machine" on page A-28. Maintenance and Troubleshooting Note • If the needle plate has been removed it is especially important may be malfunctioning; therefore, contact your dealer or nearest authorized service center. f Turn off the machine, and bobbin and presser - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 310
TROUBLESHOOTING List of Symptoms Problem Cause Solution The thread is tangled on the wrong bobbin not wind neatly on the winding thread guide correctly. bobbin. Bobbin spins slowly. Correctly pass the thread through the bobbin winding thread guide. Press [+] in the bobbin winding window to - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 311
TROUBLESHOOTING Problem Skipped stitches Needle breaks Fabric does not feed through the machine Fabric puckers Cause Solution Needle is turned, B-55 S-7 S-10 S-75, E-11 B-40 S-39 S-10 S-62 B-57 A-27 B-45, B-48 S-12, E-30 S-10 B-57 B-48 S-62 Maintenance and Troubleshooting A 2 Appendix A-31 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 312
TROUBLESHOOTING Problem while it was being sewn. There is no pattern selected. Sew while guiding the fabric with your hands so that the fabric is fed in a straight opposite direction. Contact your dealer or the nearest authorized service center. The LCD screen is fogged up. Condensation has - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 313
TROUBLESHOOTING Problem Cause Solution fabric having a very uneven surface, the position is not correctly aligned. Manually adjust the position according to the thickness of the fabric. The pointer restart the machine, follow the instructions for operating the machine correctly. Appendix A-33 - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 314
, the machine does not start. An alarm sounds and an error message is displayed on the LCD. If an error message displays, follow the instructions in the message. Below is an explanation of error messages. Refer to these when necessary (if you press operation correctly while the error message is - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 315
a pattern, or is pressed and the pattern is about to be deleted. This message is displayed when the image is deleted. A 2 Maintenance and Troubleshooting OK to delete the setting? This message appears when or is pressed to delete the settings for a utility stitch. To delete the selected - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 316
thread from the beginning. This message appears when the machine is in the shutoff support mode. Turn off the machine once to start the machine again. (see . For a list of compatible USB media, visit " http://solutions.brother.com ". This message is displayed while the USB media is transmitting. - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 317
stitch width, and the "Start/Stop" button is pushed. Use the foot controller to operate the machine. A 2 SPECIFICATIONS Maintenance and Troubleshooting Sewing Machine and Accessories (Box 1 of 2) Item Dimensions of machine Dimensions of box Embroidery Unit (Box 2 of 2) Weight of machine - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 318
USB media or a computer to upgrade software for your sewing machine. When an upgrade program is available on " http://solutions.brother.com ", please download the files following the instructions on the website and steps below. Note • When using USB media to upgrade the software, check that no data - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 319
the main power to ON. 2 → The following screen will appear on the LCD. b Press . e When the message disappears, press . Maintenance and Troubleshooting c Plug the USB cable connector into the corresponding USB ports for the computer and for the machine. → "Removable Disk" will appear in - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 320
S-71 sewing S-75 Cleaning LCD screen A-19 machine casing A-19 race A-19 Combining Patterns character/decorative stitches S-83 embroidery edit E-80 Cord guide bobbin cover S-32 Crazy quilt S-32 , Custom Thread Table E-68 E-71 Cut/Tension key E-30 D Darning S-53 Dart seam S-28 Density key - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 321
the needle position S-25 checking the needle location B-7 fabric/thread/needle combinations B-59 mode B-24 twin needle B-51 , Needle bar thread guides B-13 B-52 Needle clamp screw B-13 Needle mode selection key B-51 Needle plate B-13 , Needle position S-18 S-25 Needle Position button - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 322
B-38 Shelltuck stitches S-43 Shutoff support mode B-32 Single/Repeat sewing key guide B-12, B-41, B-44, B-52 Thread guide plate B-12, B-44, B-48 Thread marks E-75 Thread palette key E-66, E-67, E-71 Top cover B-12 Top stitching S-45 Touch pen S-100, E-67, A-22 Trial key E-19 Troubleshooting - Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 323
- Brother International DreamWeaver„ XE Innov-is VM6200D | Users Manual - En - Page 324
Please visit us at http://solutions.brother.com where you can get product support and answers to frequently asked questions (FAQs). English 882-C40/C42 Printed in Taiwan XF3615-001
Be sure to read this document before using the machine.
We recommend that you keep this document nearby for future reference.
Operation Manual
Embroidery and Sewing Machine
Product Code: 882-C40/C42