Brother International DreamWeaver„ XE Innov-is VM6200D Users Manual - En - Page 128

SEWING THE STITCHES g Press mode. to cancel the free motion sewing → Rotate the handwheel toward you (counterclockwise) to raise the feed dogs. Memo • Do not be discouraged with your initial results. The technique requires practice. Blind Hem Stitches Secure the bottoms of skirts and pants with a blind hem. Two stitches are available for blind hem stitching. Stitch Stitch name Blind hem stitch Presser foot Blind hem stitch stretch Memo • When the size of cylindrical pieces is too small to slide onto the arm or the length is too short, the fabric will not feed and desired results may not be achieved. a Turn the skirt or pants wrong side out. 2 1 3 a Wrong side of fabric b Right side of fabric c Edge of fabric d Bottom side b Fold the fabric along hem, and press. the desired edge of the 2 1 a Wrong side of fabric b Right side of Fabric 4 c Edge of fabric d Desired edge of hem 13 2 1 2 3 c Use a chalk to mark on the fabric about 5 mm (3/16 inch) from the edge of the fabric, and then baste it. 3 56 4 1 2 1 2 1 2 a Wrong side of fabric b Right side of fabric c Edge of fabric d Desired edge of hem e 5 mm (3/16 inch) f Basting d Fold back basting. the fabric inside along the 3 5 4 12 1 1 a Wrong side of fabric b Right side of fabric c Edge of fabric d Desired edge of hem 6 e 5 mm (3/16 inch) f Basting g Basting point 7 e Unfold the fabric with edge of fabric, and position the wrong side facing up. the 4 1 6 1 1 3 1 1 5 2 a Wrong side of fabric b Right side of fabric c Edge of fabric d Desired edge of hem e Basting point f Basting f Attach blind hem foot "R". S-40