Brother International HL-1440 Service Manual - Page 27

CHAPTER 1 GENERAL The table below shows the print guaranteed areas for each paper size. Size A 4 Letter Legal B 5 (ISO) Executive A 5 A 6 Organizer (J size) Organizer (K size) Organizer (L size) COM10 MONARCH C 5 DL A 210.0 mm 8.27" (2,480 dots) 215.9 mm 8.5" (2,550 dots) 215.9 mm 8.5" (2,550 dots) 176.0 mm 6.93" (2,078 dots) 184.15 mm 7.25" (2,175 dots) 148.5 mm 5.85" (1,754 dots) 105.0 mm 4.13" (1,240 dots) 69.85 mm 2.75" (825 dots) 95.25 mm 3.75" (1,125 dots) 139.7 mm 5.5" (1,650 dots) 104.78 mm 4.125" (1,237 dots) 98.43 mm 3.875" (1,162 dots) 162 mm 6.38" (1,913 dots) 110 mm 4.33" (1,299 dots) B 297.0 mm 11.69" (3,507 dots) 279.4 mm 11.0" (3,300 dots) 355.6 mm 14.0" (4,200 dots) 250.0 mm 9.84" (2,952 dots) 266.7 mm 10.5" (3,150 dots) 210.0 mm 8.27" (2,480 dots) 148.5 mm 5.85" (1,754 dots) 116.0 mm 4.57" (1,370 dots) 171.45 mm 6.75" (2,025 dots) 215.9 mm 8.5" (2,550 dots) 241.3 mm 9.5" (2,850 dots) 190.5 mm 7.5" (2,250 dots) 229 mm 9.01" (2,704 dots) 220 mm 8.66" (2,598 dots) C 203.2 mm 8.0" (2,400 dots) 203.2 mm 8.0" (2,400 dots) 203.2 mm 8.0" (2,400 dots) 164.0 mm 6.46" (1,936 dots) 175.7 mm 6.92" (2,025 dots) 136.5 mm 5.37" (1,612 dots) 93.0 mm 3.66" (1,098 dots) 56.2 mm 2.21" (675 dots) 86.78 mm 3.42" (975 dots) 131.23 mm 5.17" (1,500 dots) 92.11 mm 3.63" (1,087 dots) 85.7 mm 3.37" (1,012 dots) 150.0 mm 5.9" (1,771 dots) 98.0 mm 3.86" (1,157 dots) D 288.5 mm 11.36" (3,407 dots) 270.9 mm 10.67" (3,200 dots) 347.1 mm 13.67" (4,100 dots) 241.5 mm 9.5" (2,852 dots) 258.2 mm 10.17" (3,050 dots) 201.5 mm 7.93" (2,380 dots) 140.0 mm 5.51" (1,654 dots) 107.5 mm 4.23" (1,270 dots) 162.98 mm 6.42" (1,925 dots) 207.43 mm 8.17" (2,450 dots) 232.8 mm 9.16" (2,750 dots) 182.0 mm 7.16" (2,150 dots) 220.5 mm 8.68" (2,604 dots) 211.5 mm 8.33" (2,498 dots) E 3.4 mm 0.13" (40 dots) 6.35 mm 0.25" (75 dots) " " 6.35 mm 0.25" (75 dots) 6.01 mm 0.24" (71 dots) " 6.35 mm 0.25" (75 dots) " " " " 6.01 mm 0.24" (71 dots) " F 4.23 mm 0.17" (50 dots) NOTE: • The paper sizes indicated here should conform to the nominal dimensions specified by JIS. • A4 paper must accommodate 80 characters printed in pica pitch (203.2 mm). • The dot size is based on 300 dpi resolution. • Organizer is not supported by any printer emulations (commands). 1-14